63÷29 = about 2.172 × .09 (9% reduction for 7 tooth) = .195 + 2.172= 2.367 final
I would say at 200hp it would work but if your riding above 10k you may want the 28 gear, depending on actual hp
Belt drive ratio for 2016 LTD
- Thread starter ranger12
- Start date
63÷29 = about 2.172 × .09 (9% reduction for 7 tooth) = .195 + 2.172= 2.367 final
I would say at 200hp it would work but if your riding above 10k you may want the 28 gear, depending on actual hp
63 bottom gear with 7 tooth
27 top 2.54
28 = 2.452
29 = 2.367
Stock I would run 28 at 8 to 10k ft
Under that I would run 29
27 top 2.54
28 = 2.452
29 = 2.367
Stock I would run 28 at 8 to 10k ft
Under that I would run 29