2.8 conquer? Any feed back on it?

F_ast

Well-known member

Lifetime Membership

Feb 22, 2008

973

361

63

41

Ontario

• Mar 26, 2018

• #1

Just finished racing my 2018 Highcountry 153 on the Cains Quest endurance race in Labrador Canada. Ran a 1.6 Camso Ice cobra with 2.86 pitch 9 tooth drivers.... that track was made for that race. But riding backcountry and the trees is my passion.

2 questions:

First, will a 2.8 track fit in a non drop case with 9tooth drivers?

Because I'm running 2.86 pitch drivers, I was thinking the 2.8 coquer might be the best option left other that a 3 pitch PC. Any more feedback for the 2.8 on the PC/ assender chassis?

 

K

knh208

Well-known member

Lifetime Membership

Oct 5, 2009

317

101

43

Saskatoon, SK, CANADA

• Mar 26, 2018

• #2

Your drivers are likely about 0.3" closer to the exchanger. 3" PC is very tight with 8 tooth drivers on the old case.

Is the 2.8" measured from inside the belt, or is it real lug height? Either way, it would be somewhere between incredibly tight and won't fit at all.

A 2.6 Polaris track might work with those drivers.

I'd recommend 3" drivers and PC track to suit your typical snow.



Sent from my SM-G930W8 using Tapatalk

 

R

rkm

Free Member

Feb 26, 2008

618

218

43

• Mar 26, 2018

• #3

I can give you a pretty thorough review of it but Conquers are 3" pitch track so youll still need different drivers.

 

goridedoo

Well-known member

Premium Member

Feb 8, 2010

3,868

3,544

113

• Mar 26, 2018

• #4

F_ast said:

Just finished racing my 2018 Highcountry 153 on the Cains Quest endurance race in Labrador Canada. Ran a 1.6 Camso Ice cobra with 2.86 pitch 9 tooth drivers.... that track was made for that race. But riding backcountry and the trees is my passion.

2 questions:

First, will a 2.8 track fit in a non drop case with 9tooth drivers?

Because I'm running 2.86 pitch drivers, I was thinking the 2.8 coquer might be the best option left other that a 3 pitch PC. Any more feedback for the 2.8 on the PC/ assender chassis?

Click to expand...

Challenger 2.5 would be a good all around track that would fit on those drivers. 9104m, they are like $630 new.

 

mja

Well-known member

Lifetime Membership

May 18, 2011

446

82

28

• Mar 27, 2018

• #5

If I recall right, I had 5/8'' clearance between the 2.8 and heat exchanger with 8 tooth drivers on a 15' M8.

 

F_ast

Well-known member

Lifetime Membership

Feb 22, 2008

973

361

63

41

Ontario

• Mar 27, 2018

• #6

Thanks for the input guys.

Think I might just sell my race sled and go with an mc or alpha 1 noe anyways.