2013 m8 turbo

W

WRG2018

Free Member

Nov 8, 2018

6

0

1

• Nov 8, 2018

• #1

I have a 2013 turbo with 1300 miles on it has been turbo since break-in. compression is 120 . I plan to do the top end before my season starts and am looking for suggestions on pistons, juggs, kits or what I should be looking for when I tear it down
I run straight av gas stock head currently ride between 5500 and 9000feet 3 in track

thanks in advance for any ideas.

 

Last edited: Nov 8, 2018

J

jim

Well-known member

Nov 26, 2007

1,014

635

113

Boise

• Nov 11, 2018

• #2

Stock pistons work great. Do the whole top end including pin and bearing. Primary clutch is likely about done. Keep an eye on the weights and rollers.

 

zecow224

Member

Lifetime Membership

Apr 23, 2018

59

10

8

Wisconsin

• Nov 11, 2018

• #3

WRG2018 said:

I have a 2013 turbo with 1300 miles on it has been turbo since break-in. compression is 120 . I plan to do the top end before my season starts and am looking for suggestions on pistons, juggs, kits or what I should be looking for when I tear it down
I run straight av gas stock head currently ride between 5500 and 9000feet 3 in track

thanks in advance for any ideas.

Click to expand...

What psi of boost are you running? curious as to what gearing you are running in it.

 

W

WRG2018

Free Member

Nov 8, 2018

6

0

1

• Nov 11, 2018

• #4

I bought the sled from a buddy, I know he went to lower gears not sure what ones tho.
i normally run 8 psi
am new to the turbo its been a steep learning curve.

 

W

WRG2018

Free Member

Nov 8, 2018

6

0

1

• Nov 11, 2018

• #5

is it worth putting a mountain tek top end in