B
Will Powercommander work with ZR800 -03 ECU?
PCV and ZR800
- Thread starter Bearcat
- Start date
D
Bearcat,
The PCV will work with the pre-2005 ECU's - thus it will not fit your 2003 ZR800. The pinout is different for the older years and we do not build a harness to match.
Thank you for your interest in Dynojet Products.
~T.J.
The PCV will work with the pre-2005 ECU's - thus it will not fit your 2003 ZR800. The pinout is different for the older years and we do not build a harness to match.
Thank you for your interest in Dynojet Products.
~T.J.
B
So by swapping the pins from connector it would/should work?
I had ZR8/9 Boondocker Box in my CF7 -06 years ago and it worked good - after I swapped the connector pins from PTO side (If I remember correct it was PTO side
).
I had ZR8/9 Boondocker Box in my CF7 -06 years ago and it worked good - after I swapped the connector pins from PTO side (If I remember correct it was PTO side
).
PCV plugs directly into ECU and not into injectors for fuel control. Dobeck or old style Boonie box are your only options I believe.
B
Damn. Too bad
