Piston wash feedback
- Thread starter nate18
- Start date
Well i think pic one is a tad lean and two is rich.
But two might leaner and got hot.
Come on guys what's everyone think.
Need more threads like this.
But two might leaner and got hot.
Come on guys what's everyone think.
Need more threads like this.
T
AEM makes a very nice AFR gauge and it works !
This takes the guess worl right out of the game
http://www.amazon.com/AEM-30-4110-U...&qid=1457901075&sr=8-1&keywords=aem+afr+gauge
This takes the guess worl right out of the game
http://www.amazon.com/AEM-30-4110-U...&qid=1457901075&sr=8-1&keywords=aem+afr+gauge
Ya i agree thinking about it some more, pic one must be showing rich, fuel washing the carbon off. My cr250 often looks like this, which it's never lean at all.
The respected guys on here always say to compare plugs and wash to the egt and afr.
The respected guys on here always say to compare plugs and wash to the egt and afr.
Thanks guys...plugs actually look pretty good, Afr ratio is ok when running decent, EGT are decent, actually getting hotter egts on rich side...assuming raw fuel in Y pipe???....more concern about the stagger...sent off injectors to be flow rated and cleaned just to make sure not having an injector problem...might have to look into programming to even things up a bit. Thanks again for looking.
Keep in mind that air fuel is only an average of the two.
Similar threads
