K
I want to remove the 2 front wheels off my skid so I can update my limiter cable. I cant get the wheels off.. tried penetrating lube and a puller they wont budge any tricks?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Are you adding the 2019 limiter? I wouldn't waste my time with the 2018 version, they just break. Add the 2019 limiter and the rising rate cam block. There is also a new rear spring with a new rate as well. I'm not sure if the spring is that much different than the 2018 version.
It would be nice if Camso offered and update kit for the older kits to 2019 specs at least for all the important changes rather than having us figure it out on our own.
M5
Are you adding the 2019 limiter? I wouldn't waste my time with the 2018 version, they just break. Add the 2019 limiter and the rising rate cam block. There is also a new rear spring with a new rate as well. I'm not sure if the spring is that much different than the 2018 version.
It would be nice if Camso offered and update kit for the older kits to 2019 specs at least for all the important changes rather than having us figure it out on our own.
M5
I used a gear puller on mine when I did all the updates to it.
They're pressed on (you can draw them down with the bolt when you re-install them).
The 3 jaw puller pulled it off very easily without stressing the idler or bearing.
I tried this, and basically it started flexing the plastic on the wheel and I stopped.
Hmm...mine popped off no problem at all. I had every one of them off.
Are you adding the 2019 limiter? I wouldn't waste my time with the 2018 version, they just break. Add the 2019 limiter and the rising rate cam block. There is also a new rear spring with a new rate as well. I'm not sure if the spring is that much different than the 2018 version.
It would be nice if Camso offered and update kit for the older kits to 2019 specs at least for all the important changes rather than having us figure it out on our own.
M5
I have a list of part #'s and priceing to bring your 2018 kit to the 2019 specs. I can get all the parts.