I'm putting my front end back together after some rebuilding and powdercoating. I noticed there are 2 3/4" or so spacers on each side of the spindle. Can these be moved around on the M to make the front end narrower/wider?
Also, has anyone ever drilled the spindle out for a grease zerk on the ski pivot? Out of all the bushings, that one was by far the worst as far as corrosion/rust.
Thanks in advance.
Also, has anyone ever drilled the spindle out for a grease zerk on the ski pivot? Out of all the bushings, that one was by far the worst as far as corrosion/rust.
Thanks in advance.