I purchased a used turbo for my 2016 axys. Watched a install video several times. Do I have to drill into the throttle body boot to install BOV or is there somewhere else to install it? It came with a ecu that is programmed should I purchase larger injectors also. And has anybody had any luck running there clutch setup or should purchase a kit from indy specialties or some other company, don't want to spend a lot of timing tuning on the mountain if I don't have to. so I don't mind buying a different clutch setup. thanks
Insure that the injector color that is printed on the ECU you received is the same as the colored tape on your injectors/.. Generally Red or Yellow.
Take your time with routing and protecting the turbo Oil line from exposure to heat ( I wrap some of the older kits in a fire blanket- the new ones are a braided line).
Get comfortable with the turbo smart spring cap- I always have my clients feel for the alignment notch with a spring removed to become familiar with it, so while changing boost springs- the cap doesn't get crossed.
A Long good quality spring tool is paramount - making super easy when installing ( double spring) the lower springs on the underside of the "Y" Pipe.
There is ton's of information on Clutching - if you do the search for your elevation.
Super easy install- but these are just a few pointers.