A
Ok I've looked everywhere and cant find a diagram on where the vaccum lines go fron the hac unit this is my current configuration 1 center line is a vent 1 goes to right carb lower leftside, left side of unit (pto side) goes to the left side of each carb via a tee, right side of unit goes to the right side of each carb. I pulled the carbs to clean them made a note as to where everything went put it back together and now it runs like crap. If you have a 94 could you take a look for me and tell me if its right. I'm going to change the plugs tommarrow as the both looked fouled to see if it makes a differance. Any help on this would be cc apperciated.