• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

97 zr580 flooding/ecu blinks once

JordanWilliams

New member
Lifetime Membership
Sep 26, 2013
67
2
8
Eastern South Dakota
I have a 97 zr580 I just put together. Won't run. Loads full of gas. Any suggestions? Has spark injectors have been checked has fuel to the rail. Tps sensor or coolant temp. Sensor? Got the sled in a box of parts. Everything is here. Starts to Fire but won't stay running.
 
U
Jan 19, 2016
2
0
1
Billings Mt
If you can, remove the pipe from the Y pipe, and unplug your injectors. Pull it several times with the key on kill switch up, this will clear the case. Assuming you have new good gas in it. When the crankcase and pipe load with fuel they are impossible to start. Once it starts to idle, plug your injectors back in and slowly push the pipe to the y pipe to let it start to clear out. It has happened to me a few times. Reinstall exhaust springs after it is cleared up. If that isn't it, then start ohm testing as stater, tps... checking electrical.
 
Premium Features