KM to MPh

Not positive the answer is the same, but here is the answer for the Rev; it might be the same. The same thing happened to me after a buddy replaced my top end and put stuff back together -- there is a single black wire that goes into a single connector up near your gauges. Unplug it, and your speedo should go back to mph.

Hope that works for you...


EDIT: re-read your post; I assume you mean you want to change it back to mph.

Here is how you do it. Lift up your hood and look at the under neath side of the hood. On the left hand side of the sled where the wiring harness is there is a small black wire with a white plastic clip. Tjis wire is outside of the harness but does connect into it. UNplug the plastic clip and voila you are now in MPH instead of KMH. If you have anymore problems let me know and I will take pictures on mine and post them for you.