• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

SnoWest Forums Project Sled "NYTROCITY" SOLD*****SOLD*****

Status
Not open for further replies.

christopher

Well-known member
Staff member
Lifetime Membership
Nov 1, 2008
81,518
27,378
113
Rigby, Idaho
The SnoWest Forums project sled "Nytrocity" is now SOLD
All details can be seen in the CLASSIFIED section of SnoWest.

http://www.snowest.com/forum/swapmeet/showproduct.php/product/7201/cat/all

2010 Yamaha Nytro MTX 162 SE.
http://www.snowest.com/forum/dto_garage.php?do=editvehicle&v=1782
Sled Retail Value = $25,000

Asking Price = $6,995!!!

This was the SnoWest Yamaha project sled "Nytrocity".


Antigravity 12cell Lithium Battery
AVID Drivers
Dunatic Polished Tunnel
HID Light Conversion
Jacobson Anti-Rollover Kit
KMOD Suspension
Koso X2 Boost, Temp, Air-Fuel gauge
MPI Stage 1 Supercharger w/ Inter-cooler "running 9.5psi"
OFT Racing Steering Post Relocater
PsychoSled BOV
PsychoSled "Secret Squirrel" Clutch Kit
PsychoSled Bridge Fuel Controller
Raptor Clicker Shocks, front and rear.
Roest Racing Instrument Panel Mount
Roest Racing Instrument Panel Vent
Roest Racing Skid Plate
Simons Gen III skis
SKINZ, Rear Bumper
SKINZ Concept A-Arms
SKINZ, Air Frame Boards
SKINZ, Air Frame Seat & Storage Bag
SKINZ, Front Bumper
SKINZ Tunnel Bag
SKINZ Tunnel Brake Light
SKINZ, Under the Tunnel Exhaust Conversion
TrailTank Fuel Tank
TS Fabrications HD Oil Tank
Yamaha Ascent Track
Yamaha Hand Guards
YamaHeater Hand Warmers

It should be noted that..

1.
There are NO known electro-mechanical problems with this sled.
It runs GREAT.

2.
It is being sold only because we need a new project sled to keep modifying and writing about on SnoWest.

3.
Darn near every modification listed above is HEAVILY documented here in the Yamaha forum, so it's history is VERY well established.

4.
Sled will come with all of it's factory OEM Parts that were replaced or upgraded.


3,200 total miles

Nytros are rated at about 135hp at the crank at sea level.
On average you get 10hp per pound of boost.

135 + 95 = 230

This photo does NOT show the KMOD suspension or the SKINZ A-Arms.
ad-2.jpg



Time to get her sold, the new 2015 project sled is coming.

FINDER'S FEE.

If you help me find someone who purchases this sled, I will pay you a $100 finder's fee
and
A Lifetime Membership to Snowest
A Snowest KLIM Hoodie
A Snowest T-Shirt
A Snowest KLIM Hat
 
Last edited:

christopher

Well-known member
Staff member
Lifetime Membership
Nov 1, 2008
81,518
27,378
113
Rigby, Idaho
can u crank this up to say 270HP. or what is needed to do so???

I currently have the Nytro Stage 1 220HP Supercharger Kit - 11psi

You would need to upgrade to the Nytro Stage 2 280HP Supercharger Kit - 15psi

Stage 2 Specs
http://www.mountainperformance.com/snowmobile supercharger specs stage 2.htm

MPI says its a direct bolt in replacement upgrade.
Remove the current compressor and swap it out for the high pressure unit.
Change the Injectors and Fuel pump and you are on your way.
Everything else is pretty recycled.


 

christopher

Well-known member
Staff member
Lifetime Membership
Nov 1, 2008
81,518
27,378
113
Rigby, Idaho
Here are some VERY RECENT photos showing all sides and aspects of the sled.
Tunnel needs to be POLISHED and sled needs to be CLEANED.
But otherwise she is in great shape.

Sled WILL include all the missing SKINZ BAGS as well.

COME ON GUYS.
This is a GREAT SLED at a TERRIFIC PRICE!!


picture.php
 
Last edited:

YAMA S

Well-known member
Lifetime Membership
May 16, 2012
469
325
63
W. Wa.
New project

I'm thinking you need to start a "disassemble" thread..... How to correctly part out a custom sled!
 
Status
Not open for further replies.
Premium Features