S
i keep randomly getting code 12 in the ecu. anyone seen this ?
2016 m8000 code 12
- Thread starter Sledneck_1987
- Start date
Quick search shows it's probably a stator problem.
Seem to remember I saw the meanings listed on the clutch cover, will be out cleaning my sled tomorrow from todays ride and let you know.
Failure in ignition coils is what my 17 says.
Snapshot of my owners manual for a 17.
Wonder if the coil failure could be due to the stator not producing enough power to fire the coils correctly? Did another google search and the only thing that came up directly related to the code 12 was a thread from snowest where the problem was cured by changing the stator. This thread was from a older M8, not sure if the code meanings have changed from the original M's to the Proclimb.
http://www.snowest.com/forum/showthread.php?p=3822854
http://www.snowest.com/forum/showthread.php?p=3822854
My thoughts on the explanation of the code are that there is something wrong with the stator also.
Research on my M8 stated I had a stator problem as well but, a firmware update of my Power commander remedied the issue but, you probably don't even have a Power commander on your sled.......
S
yes i have a pcv with timing and fuel. the sled. with head, y pipe and pipe.
It's the PCV with timing. They make them throw that code.
S
so theirs no way around that code? if i have the pcv installed ?
Frosbite posted that a firmware update of his power commander cured his problem, maybe this is the cure to your problem.
I had the same problem... still ran fine no issues. Contact DynoJet with the serial # and see if there are updates for your unit. They are very easy to deal with!
