If you've been following the thread "My Summer Project" on the rebuild/modification of my '09 700 RMK 155", it's done and running.
Here's the link to the build-up thread: http://www.snowestonline.com/forum/showthread.php?t=271887
Here's the final low-down on what was done:
Engine rebuilt w/SLP 777 kit & Exh System (huge thanks to SLP)
Polaris "Saw Blade" brake rotor (1lb weight loss)
Mtn Tamer w/IceAge rails, anti-stab, and Fox Float2 shocks
Peak 2.5 154" track
Fire-n-Ice windshield intake vents
Frogg Skin side panel vents
Avid drivers (Thanks to "rmkboxer")
Team Tied Clutch w/the 73-57.46ER helix and Red/Black spring
Powder coat tunnel/bulkhead black other parts red
Skinz front & rear bumpers
Skinz Air Frame boards
PDP "SHOCKER" flap
Polaris gloss black w/red flames windshield
SLP Powder Valves
Pro-Climb rear idlers on IceAge axle
Previously bought & installed items are:
Float2 ski shocks w/Skinz protective covers
BOSS seat
Barkbusters
Powder Pro skis
Various SLP venting
Slide kicks scratchers
Here's a couple of before pics:
Pics I took today after running it for the first time:
Sorry about the spot, it's in between the lenses of the camera
It was so nice to finally here it run and run well. No codes, TPS seems to be still set, reverse still works. Now where the hell is the SNOW!!!!!!!!!!
Here's the link to the build-up thread: http://www.snowestonline.com/forum/showthread.php?t=271887
Here's the final low-down on what was done:
Engine rebuilt w/SLP 777 kit & Exh System (huge thanks to SLP)
Polaris "Saw Blade" brake rotor (1lb weight loss)
Mtn Tamer w/IceAge rails, anti-stab, and Fox Float2 shocks
Peak 2.5 154" track
Fire-n-Ice windshield intake vents
Frogg Skin side panel vents
Avid drivers (Thanks to "rmkboxer")
Team Tied Clutch w/the 73-57.46ER helix and Red/Black spring
Powder coat tunnel/bulkhead black other parts red
Skinz front & rear bumpers
Skinz Air Frame boards
PDP "SHOCKER" flap
Polaris gloss black w/red flames windshield
SLP Powder Valves
Pro-Climb rear idlers on IceAge axle
Previously bought & installed items are:
Float2 ski shocks w/Skinz protective covers
BOSS seat
Barkbusters
Powder Pro skis
Various SLP venting
Slide kicks scratchers
Here's a couple of before pics:
Pics I took today after running it for the first time:
Sorry about the spot, it's in between the lenses of the camera
It was so nice to finally here it run and run well. No codes, TPS seems to be still set, reverse still works. Now where the hell is the SNOW!!!!!!!!!!
Last edited: