I have a 2004 800 RMK with some wiring issues. My Temp sensor is not wired in the same on my sled as the wiring diagrams states it is suppose to be. My black temp sensor wire is spliced in the harness to the black wire off of the TPS and then it goes into the TPS pin for the CDI. The brown wire off of the temp sensor is in the correct location(pin 7). Pin 21 which is suppose to be the black temp wire is empty on the harness. If I wire the temp sensor in the way it states on the diagram the CDI goes into full out lim mode. Can anyone explain why my sled is wired this way and what is correct?