Is there an 800 number to ask why an aftermarket part does not install correctly?
BRP aftermarket not fitting
- Thread starter donbrown
- Start date
I think that is a call to who ever built the aftermarket part, not BRPs responsibility to ensure someone else’s aftermarket part fits.
Now if it is a official Skidoo accessory that is different.
Now if it is a official Skidoo accessory that is different.
It is an aftermarket BRP product. Do you know the number for BRP?
M
When you do find a number dont tell them it's an aftermarket Brp accessory. it's just a BRP accessory. Personally I'd just bring it into my dealer.
Called BRP told to take to authorized SKIDOO dealer for installation.
Dealer is 800 miles away.
What ya installing?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Adjustable toe holds PN 960201370
I
It’s either BRP, or its aftermarket. No in between. If BRP makes it; well, it’s not an aftermarket part.
Adjustable toe holds BRP PN 960201370
J
In my industry we refer to that as an after-sale part. I'm curious to know what the problem is as I've seen something about a stud that interferes and I'd like to know what the solution is.
At 2 minutes they discuss taking a bolt out of the brake cover.
A 2018 gen 4 154" has a NUT securing the brake cover and bolt is welded to the tunnel.
When adding the toe hold along with the brake cover … the bolt welded to the tunnel is not long enough to thread the nut on securing both brake cover and toe hold.
BRP directions say the toe hold is secured by only bolts … not correct on a 2018 sled.
Thank you for the video.
Last edited:
Similar threads
