I was just doing this, so I thought I would post up to help anyone else out. If you're considering removing the foam from the side panels to help keep the belts cooler, here's a way to do it successfully without a mess.
If you've ever filleted a fish, or skinned a deer, you remove the foam the same way. Start at one end and slice at the glue with a razor blade while pulling the foam up. You can either leave the remaining residue or it'll clean off with acetone, Goo gone, etc.
There may be other ways to do it, but this is how I do it.
If you've ever filleted a fish, or skinned a deer, you remove the foam the same way. Start at one end and slice at the glue with a razor blade while pulling the foam up. You can either leave the remaining residue or it'll clean off with acetone, Goo gone, etc.
There may be other ways to do it, but this is how I do it.