• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Turbo Pro clutching update help

W
Jul 1, 2016
25
1
3
Minnesota
Have a 2011 turbo pro with a Silber kit. Still currently has the clutch setup that came with it from the get go. Almond primary(165/327) with rooster adjustables 76G, black/orange(180/280) secondary with 44 48 helix.


has a 155 3" track
6-9000'
7-10PSI


Topics probably been beat to death but curious if anyone has locked down a more up to date setup that performs well. Thank you
 

2XM3

Well-known member
Premium Member
Oct 6, 2008
3,280
1,370
113
Bitteroot valley,MT
Been a while but here what I ran in my 2011 pro/silber turbo

150/330, 78 gr mtx 180/300 with (I think) 40/48 helix, 14 psi av gas at 7000 feet, we had a really good older clutching thread but it got lost years back :face-icon-small-sad
 

diamonddave

Chilly’s Mentor
Lifetime Membership
Apr 5, 2006
5,569
3,865
113
Wokeville, WA.
Have a 2011 turbo pro with a Silber kit. Still currently has the clutch setup that came with it from the get go. Almond primary(165/327) with rooster adjustables 76G, black/orange(180/280) secondary with 44 48 helix.


has a 155 3" track
6-9000'
7-10PSI


Topics probably been beat to death but curious if anyone has locked down a more up to date setup that performs well. Thank you




The only thing I would do would be to change your secondary spring to a black/lime 180/300 and add thundershift glide washers to your primary spring. Verify you have good alignment. Damn good setup for a Silber and 3" track.
 
W
Jul 1, 2016
25
1
3
Minnesota
The only thing I would do would be to change your secondary spring to a black/lime 180/300 and add thundershift glide washers to your primary spring. Verify you have good alignment. Damn good setup for a Silber and 3" track.

Awesome, that will be simple enough, I will give it a try.


I ordered the glide washer kit from thunder products, only other question to you diamonddave would be should I just use the 2 lubricated/glide washers on each side of the spring or do you recommend also using the steels for my particular setup?


Thanks!
 
Last edited:

2XM3

Well-known member
Premium Member
Oct 6, 2008
3,280
1,370
113
Bitteroot valley,MT
another setup I ran

my last set up at 13 psi boost

155/300 speedwerks H5 primary
78.5 gr roosters , all in the tip
40 50 .4 team helix
165/310 secondary with 2 delrins

@ 7500 ft 8250 pretty good on the bottom as well
 
Premium Features