T
Custom Built Yamadoo For Sale
-Rev Chassis
-2005 yamaha vector engine(973cc)
-Powderlites Head shim and cam timing
-Yamaha FX nytro oil pump(higher flow)
- ARP Head studs
- Can run 14lbs at 8000+ ft on pump premium aprox240-250hp
- 18-19lbs with race fuel aprox 280-300hp
-321ss Schedule 40 short 3 into 1 header(tig welded)
-HKS Racing gt2530 ball bearing turbo charger
-turbonetics manula Boost controller
-3 inch tunnel dump downpipe
-Vortech Maxflow Race BOV
-2.5 inch aluminum cold air intake
-Bar and Plate standup intercooler
-high volume Efi fuel pump
-mallory Fuel pressure reg
-MPI oil tank
- Custom built aluminum fuel tank
-2.5 inch autometer liquid filled boost gauge
-AEM UEGO Windband Air/fuel gauge
-Simmons Gen1 skis
-Summit width A-arms
-White lighting Billet rail rear suspension with custom transfer coupler blocks.
-Full body skid plate
- XXX mod Rods vent kit
- 2 wheel rear axle (8 inch wheels)
-162 Powerclaw track Couple lugs missing
-Wahl Bros Extrovert drivers
-22/43 gearing
-Team Roller Secondary
There is probally something I am missing. Either way i am very happy with how it handles and I have got all the bugs worked out of it now. Suspension is easily tunable to keep the front down with the adjustable transfer blocks and straight rails. Also Weight is all very centralized as there is nothing in the nose of the sled anymore. Very easy to lay over and sidehill.
I don't need to sell but I want to go shorter and I figure if I could sell this i could build something different for next year.
If your interested I can be reached via PM or at dirk_03@hotmail.com or by phone at 507-380-5666. I maybe going out to wyoming in the middle of march and could help with delivery.
I would like to get $10500 but would be willing to listen to offers. Also may be interested in partial trade for a yamaha nytro.
PRICE DROP $9500/BO
PRICE DROP AGAIN $7500/bo Very motivated to sell.
-Rev Chassis
-2005 yamaha vector engine(973cc)
-Powderlites Head shim and cam timing
-Yamaha FX nytro oil pump(higher flow)
- ARP Head studs
- Can run 14lbs at 8000+ ft on pump premium aprox240-250hp
- 18-19lbs with race fuel aprox 280-300hp
-321ss Schedule 40 short 3 into 1 header(tig welded)
-HKS Racing gt2530 ball bearing turbo charger
-turbonetics manula Boost controller
-3 inch tunnel dump downpipe
-Vortech Maxflow Race BOV
-2.5 inch aluminum cold air intake
-Bar and Plate standup intercooler
-high volume Efi fuel pump
-mallory Fuel pressure reg
-MPI oil tank
- Custom built aluminum fuel tank
-2.5 inch autometer liquid filled boost gauge
-AEM UEGO Windband Air/fuel gauge
-Simmons Gen1 skis
-Summit width A-arms
-White lighting Billet rail rear suspension with custom transfer coupler blocks.
-Full body skid plate
- XXX mod Rods vent kit
- 2 wheel rear axle (8 inch wheels)
-162 Powerclaw track Couple lugs missing
-Wahl Bros Extrovert drivers
-22/43 gearing
-Team Roller Secondary
There is probally something I am missing. Either way i am very happy with how it handles and I have got all the bugs worked out of it now. Suspension is easily tunable to keep the front down with the adjustable transfer blocks and straight rails. Also Weight is all very centralized as there is nothing in the nose of the sled anymore. Very easy to lay over and sidehill.
I don't need to sell but I want to go shorter and I figure if I could sell this i could build something different for next year.
If your interested I can be reached via PM or at dirk_03@hotmail.com or by phone at 507-380-5666. I maybe going out to wyoming in the middle of march and could help with delivery.
I would like to get $10500 but would be willing to listen to offers. Also may be interested in partial trade for a yamaha nytro.
PRICE DROP $9500/BO
PRICE DROP AGAIN $7500/bo Very motivated to sell.
Last edited:
