S Chassis Mod and vintage sled pics lets see them
- Thread starter wildcard28
- Start date
H
I wanna see some mach z stuff.
94 F-chassis to an S-chassis. 583. Wish it was a 670, would stretch it to 151/159 .
My boy had a lot of fun on that old sled, we've still got it, good shape and runs great, just not enough flotation, should stick a 144x16x1.75 under it if I could find one.
My boy had a lot of fun on that old sled, we've still got it, good shape and runs great, just not enough flotation, should stick a 144x16x1.75 under it if I could find one.
Last edited:
That is one of my favorite pics. It would have looked a lot better if my dad wasn't so quick on the camera button. My step-bro and I were launching that thing about 10-12ft in the air. Had to hit it fast to land on the transistion about 60ft away. Not a very steep take-off. Considering it was a sled we borrowed, it was a very good day.
That sled wheelied but was very tame and a decent climber. The M-10 out back helped it a ton.
Last edited:
A
Here is a 98 f111 700 that i am playing with.Had the belt drive laying around from another project,at any rate crank shop pipes,m10 with tyson billet tourqe arms arctic 10.4 secondary and a 151x2.25 finger driven by 10 tooth anti ratchet's.I need clutching advice!!!! Not trying to hijack the thread but please HELP!!!
S
1994.5 670 Summit. Has a few goodies.......99X skid w/8.0" big wheel (currently for sale), extended CC, ported 151x16x2 (currently for sale), 686cc fully ported, blah, blah, blah..........oh and a bottle.
Last edited:
T
Cool thread wildcard28!!!
Just got mine out of the shop!!
97 summit chassis with 2001 159'' summit skid, 159'' finger track!! 15inch shocks, 740 union bay, brand new twin crank shop pipes p-85 prim, pro taper bar etc!!
still waiting on the pistons and rings!! Hope to get the parts today!!
Fu$$!! I cant get the pics to upload!! Ill try later!
Just got mine out of the shop!!
97 summit chassis with 2001 159'' summit skid, 159'' finger track!! 15inch shocks, 740 union bay, brand new twin crank shop pipes p-85 prim, pro taper bar etc!!
still waiting on the pistons and rings!! Hope to get the parts today!!
Fu$$!! I cant get the pics to upload!! Ill try later!
E
Few new pics i took yesterday. Ordering New Simmons skis soon and hopefully a new(er) hood.
Bead blasted the Pipe and Y-pipe, then threw on some 1200* flat black. MBRP can on the way.
Straigtening the running boards, had to drill and grind off the old metal brackets from the inside, making some new 1/8" steel brackets and some Fishbone board supports, or mabey some Rox sled treads...
Bead blasted the Pipe and Y-pipe, then threw on some 1200* flat black. MBRP can on the way.
Straigtening the running boards, had to drill and grind off the old metal brackets from the inside, making some new 1/8" steel brackets and some Fishbone board supports, or mabey some Rox sled treads...
O
Bump.
98-S chassis , ported 151", P-85 Primary ,Cat roller sec. ,8tooths extro's, jaws pipes, Diamond"S" hood, XP bars , Goldfinger ,......And a sore back lol.
98-S chassis , ported 151", P-85 Primary ,Cat roller sec. ,8tooths extro's, jaws pipes, Diamond"S" hood, XP bars , Goldfinger ,......And a sore back lol.
Last edited:
Nice sled,
I added a mod or two to mine this week, I built my own LH Throttle Control
I bought a Gold Finger control from Biscycle shop and made the mechanisn on the thumb control, Also adding a Safety Pin and need to add a few finishing touches, And also made a set of Custom Trailing arms out of the front part of the original arms, Just need to paint them. I am actually going to make a set or two from scratch in the future and maybe a set out of Chromoly.
wildcard28
I added a mod or two to mine this week, I built my own LH Throttle Control
I bought a Gold Finger control from Biscycle shop and made the mechanisn on the thumb control, Also adding a Safety Pin and need to add a few finishing touches, And also made a set of Custom Trailing arms out of the front part of the original arms, Just need to paint them. I am actually going to make a set or two from scratch in the future and maybe a set out of Chromoly.
wildcard28
O
kool , that should work great..And alot cheaper than the aftermarket ones too.( be careful your jacket dont catch it tho! makes for some fancy high speed manouvering lol)... Did you just use the exsisting spindle tube from your old T-arms?
Thank You, ya I used the spindle tubes from the original trailing arms and control rod mounts , I beefed up the shock mounts they are sort of a rough draft until I make some from scratch.
Can`t seem to get the pics of them loaded cause it tells me I used them in another thread.
Here is a link to my project. http://s375.photobucket.com/albums/oo197/ddcard/
wildcard.
Can`t seem to get the pics of them loaded cause it tells me I used them in another thread.
Here is a link to my project. http://s375.photobucket.com/albums/oo197/ddcard/
wildcard.
S
Here some pictures of my sled and my new sledder for the future. Good thing it is hard to pull over.
H
hers my 97 xx summit
144 2in track,785 union bay,crank shop twins ,46 mm carbs,etc...........
144 2in track,785 union bay,crank shop twins ,46 mm carbs,etc...........
Nice sleds.
How did you get a 785?
wildcard28
How did you get a 785?
wildcard28
H
i didnt, the guy i baught it from did, bored and stroke 670 unless he was bs,n me
T
Well here she is!!
Ordered all new fuel lines, handle bar,and bla bla bla bla today!!
So hopefully ill get the engine back in be Tuesday and have it just about ready to go!! OH - the clutches!!
Later
TG!!
trailing arms are black!!
and i polished the tunnel again!:beer;:beer;
Ordered all new fuel lines, handle bar,and bla bla bla bla today!!
So hopefully ill get the engine back in be Tuesday and have it just about ready to go!! OH - the clutches!!
Later
TG!!
trailing arms are black!!
and i polished the tunnel again!:beer;:beer;
building 98 summit x, timbersled rear skid kit with fox floats, timbersled front arms and floats, cpi twins, cut rotary to match 501 valve, 151 track, already using br tech hood, snow eliminators on tunnel, takes longer to build than thought but sure is a blast as progress comes along, love to see other sleds of the era
pics please , I would love to see a timbersled under that chassis and a pic
of the hood, whats it cost for a hood like that?
wildcard28
if this vid work, then the year I actually said the track was is obviously wrong, was a bit nervouse with a few error on a few details.
of the hood, whats it cost for a hood like that?
wildcard28
if this vid work, then the year I actually said the track was is obviously wrong, was a bit nervouse with a few error on a few details.
4
Heres my 98 Summit X all it had at the time was +1mm wisecos. Currently doing a 159" build and she got CPI twin, ufos, and a silver bottle this summer. Waiting on parts and then I will post pics
