Bad injector?

Snowhood · Feb 12, 2013

Just got my engine back in the sled had 40 trouble free miles ran perfect went out again mon and my check engine light started blinking (7 times) I think it has something to do with injectors. I check all the connections and looked for a frayed wire or something but all looks good. It only hesitates below half throttle top end runs great.I did mix the gas 50:1 for the break in on top of the injection could this be why im getting the hesitation and the check engine light? Any help would be great.

guidoxpress · Feb 13, 2013

I don't have my flash chart handy to check the 7 flash code..

Bt if its referring to the injectors, they don't go bad often, but they do on occasion.

My guess would be a pin in the connector got pushed in when you connected the wiring harness to the injectors. Pull the connection apart on all injectors and look for any loose or pushed in pins. This is a very common issue, hope its yours also bud

05900 · Feb 13, 2013

Use a meter to ck continuity as you wiggle test harness as well..as TPS harness would fail....:face-icon-small-dis

Snowhood · Feb 13, 2013

OK thanks guys I will post what I find tomorrow.

Search

Bad injector?

Snowhood

Free Member

guidoxpress

Well-known member

05900

Embrace the BRAAAAAAP!

Snowhood

Free Member

Similar threads