7
Hey all, I'm wondering if my stator is toast or possibly salvageable. I've been testing according to the manual. Everything checks out besides the highlighted coils section in my photo. I'm not getting an ohms reading for Green/Red to Green/Yellow or for Green/Red to Brown/White. However, I'm getting 15 ohms for Green/Yellow to Brown/While which isn't documented in the manual.
I have pulled the stator out and I'm getting the same readings from both the connection in front of the gas tank and on the stator itself. The housing around the two green coil wires was showing some wear, but I cut the housing and inspected the wires in that tail and they all seem to be fully covered in their housings. I have continuity from the stator to the connection on Green/Red to itself, Green/Yellow to itself, and Green/Yellow to Brown/White.
The stator looks to be in fine condition. Do I have to get a new stator since the green wires aren't showing the correct ohm reading or is there something I can do to fix this?
Thanks!
Photo: https://ibb.co/f37boG
I have pulled the stator out and I'm getting the same readings from both the connection in front of the gas tank and on the stator itself. The housing around the two green coil wires was showing some wear, but I cut the housing and inspected the wires in that tail and they all seem to be fully covered in their housings. I have continuity from the stator to the connection on Green/Red to itself, Green/Yellow to itself, and Green/Yellow to Brown/White.
The stator looks to be in fine condition. Do I have to get a new stator since the green wires aren't showing the correct ohm reading or is there something I can do to fix this?
Thanks!
Photo: https://ibb.co/f37boG
Last edited: