Belts blown count

Rooster Built · Feb 15, 2017

We are interested to learn how many belts people have blown this season so far. If possible would just like to list elevation you ride, miles so far and belts blown. Thanks in advance for helping us learn!! ❄

Chadly · Feb 15, 2017

0 belts on a combined 800 miles on both sleds

Evanbcx · Feb 15, 2017

0 belts. 0-3000. 240km

Zatch · Feb 15, 2017

0 belts. 380 miles. 8-10,000 ft.

s.e.xtreme · Feb 15, 2017

3 in 329 miles. Most miles 2000' to 5000'. All junk removed, nose vents and xtreme air vents and all clutching available at the time. Shr Ramps ordering tomorrow. Still hot.

sledhead_24_7 · Feb 15, 2017

Blown 2 strings on 2 separate belts, exploded one and wasted 2 more from excessive wear for a total of 5 belts. Tons of belt dust, worse after the exploded belt. Roughly 700-750 miles. Summit X 165X3", stock. Ride Jackson Wy area, 6500-10500 mostly.

Have given up on stock parts and moved on.

Xgraphite · Feb 15, 2017

0 Belts 300 miles, 6,000 - 10,000

norsepeak · Feb 15, 2017

670 miles, 3-6500' in the cascades. Finally pulled a cord on my first belt. All riding has been back country, deep snow tree bashing.

Bobbysky · Feb 15, 2017

520 mile. 1 cord and 1 blown belt. 4000-6000ft. After the cord pulled at 175miles I added black sec spring and Goodwin pin get to get me pulling correct rpms.

Bocephus · Feb 15, 2017

0 blown belts

350 miles from 7-10k feet (stock summit clutching, clicker 3 most of the time, clicker 4 if its DEEP)
150 miles at 1500 feet (stock summit clutching, clicker 1)
removed all foam
clutch cover not modified

whitefish · Feb 15, 2017

0 Belts on 600 miles at 2500-6000.

powdermuncher · Feb 15, 2017

5 sleds in our group 300 to 500 miles each no belt so far, all had foam removed and weight added. Had some early signs of belt slip and heat in the first 3 after that we did the mods on all of them. Good enough to ride without problems but definitely not perfect.
Riding between 2500 and 500 right now.

Wyopowder · Feb 15, 2017

Belts

0 blown 600 miles 7-10,000

rocks rev · Feb 15, 2017

0 blown 8-10,00 ft 450mi. Broke in new belt-35mi. switched out to the belt off my 16 that already had 1000mi. on it.

cbouton · Feb 15, 2017

After breaking in Stock belt for 40 miles removed all sound material and riding at 0-2500ft on stock high clutching clicker 1 pulled cord on belt at 80 miles, yes it was over revving. Since then I had dealer put in Sea level kit and I switched to gates belt. Was still slightly over revving on clicker 3 so put heavier high altitude pin bolts back in and at 500ft elevation clicker 3 in about 6" fresh on firm based hitting 8000max rpm, should be perfect in the deep now. If not will drop to click 2 or 1. Have to say though with sea level kit machine is much smoother at engagement and not nearly as Jerky on bottom end 0-10mph.

Blu Du · Feb 16, 2017

1 trip 6000-9000 599 miles. belts still good. I didn't touch a thing, never even washed the clutchs

b-litt · Feb 16, 2017

One broken belt
1,300 miles on sled
6,000-8,500 ft.

Belt broke at 300 miles in over the hood pow on a very long full pinned pull. Foam removed, drilled cover, always set at right deflection, and don't let it rev over 8,000 rpm.

In addition before the first belt broke it was pulling 8,000 rpm on clicker one. After the belt broke I have to have it on clicker four to get the same 8,000 rpm. I cleaned it out good, but something's wrong...

Wapow · Feb 16, 2017

b-litt said:
One broken belt
1,300 miles on sled
6,000-8,500 ft.

Belt broke at 300 miles in over the hood pow on a very long full pinned pull. Foam removed, drilled cover, always set at right deflection, and don't let it rev over 8,000 rpm.

In addition before the first belt broke it was pulling 8,000 rpm on clicker one. After the belt broke I have to have it on clicker four to get the same 8,000 rpm. I cleaned it out good, but something's wrong...

Clickers on pDrive don't work like the older TRA. Doesn't control top RPM, but rather how the clutch revs. That said, if there was a noticeable change after blowing a belt, that's cause for concern. Have you pulled your primary to confirm no cords in the seal?

Wapow · Feb 16, 2017

350 miles, no blown belts, added weight. Sled rocks!

DITCHBANGER · Feb 16, 2017

800 miles ...0-Belts(still looks new)

1000ft..951, 150/250,19.5gr. venting in shock tower and bottom pan,belt guard cut and insulation removed..best sled ive ever owned by far

Belts blown count

Well-known member

Forum Expert

Active member

Member

Member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads