Gems Settings for Supercharged Phazer

J

jwright

Free Member

Dec 3, 2012

6

0

1

• Mar 6, 2013

• #1

Im having a few issues dialing in my phazer im close to sea level running 8lbs of boost. Ive tried the settings on mpi but the sled still stumbles on the bottom end and is slightly hard to start. i also can't seem to get the a/f down to the recommended numbers. What are others using for settings?

 

Wheel House Motorsports

Well-known member

Lifetime Membership

Nov 27, 2007

29,933

5,968

113

34

SW MT

• Mar 6, 2013

• #2

the green is all that is going to affect the low speed bump, if its still stumbling, then the issue is there with green at 0 then the issue is on the stock side of things.

as for getting AFR down, did you try adjusting green/blue up??

 

J

jwright

Free Member

Dec 3, 2012

6

0

1

• Mar 6, 2013

• #3

ya i tried bumping the green/blue up over mpi recommendations still at mid and wot the a/f reads around 14 and will flicker to 16. im going to test the a/f to see if the senor may also be giving faulty readings. i was told that mid should be around 12-13 and wot around 10-11? I have tried bumping settings 1,2&3 up as well doesnt really change to much

 

S

stingray719

Well-known member

Jan 22, 2008

1,698

670

113

Colorado Springs, CO

stingraymods.com

• Mar 6, 2013

• #4

Do you have the stage 1 or 2? And if stage 2 do you have an aux pump?

 

J

jwright

Free Member

Dec 3, 2012

6

0

1

• Mar 7, 2013

• #5

I'm running a stage 1, with 8lbs of boost and 50/50 race fuel/gas.