• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Clearance for Chain case w/ Holz D&R

wrtmani

Well-known member
Lifetime Membership
Nov 26, 2007
645
131
43
Kalispell, Mt
Quick question, I have a 2001 800 "LE" RMK chassis with Holz D&R plates installed. I was told by someone on here the Holz kit used the older, shorter Wedge case. I believe the clutch shaft is relocated to inside the tunnel (chassis is tarpped up under 2 feet of snow or I'd check for sure.)

Wondering if there is clearance for either a 9-tooth 2.52" pitch driver and a 2.4" lug height or a 8-tooth 3.0" pitch driver and 2.25" lug height. Western Power Sports catalog lists diameter of 9T/2.52 at 7.05" and the 8T/3.0 at 7.49". I have the 9T shaft when it came with this chassis and am looking at purchasing an 8T shaft. Thanks in advance for the assistance!
 
Premium Features