Polaris Axys on the Dyno - Build up

joey@bmp · Oct 18, 2018

I will keep adding to this thread with videos - Make sure you subscribe to my youtube channel for all the latest updates

https://www.youtube.com/channel/UCvj36zXN7wwEEHF6tT2YwFQ

on break-in mode on the superflow 902-
<iframe width="560" height="315" src="https://www.youtube.com/embed/yehyjpKXZOQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
https://youtu.be/yehyjpKXZOQ

Still in break in doing full sweeps at max HP-
<iframe width="560" height="315" src="https://www.youtube.com/embed/2hhlv7xoGRY" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
https://youtu.be/2hhlv7xoGRY

Stock out of break in->vvv
<iframe width="560" height="315" src="https://www.youtube.com/embed/E3hLkQ-Ezks" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Full Velocity Muffler -
<iframe width="560" height="315" src="https://www.youtube.com/embed/b0fRrroRvpE" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/9qsvcKAbVO4" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Powder Lite Muffler
<iframe width="560" height="315" src="https://www.youtube.com/embed/LrjKQpfT9e4" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/7flTpqdDa-Q" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

How it compares to an 850 Doo
<iframe width="560" height="315" src="https://www.youtube.com/embed/BFr9W6g4ltE" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

How it compares to an 800 axys with BMP stage kit
<iframe width="560" height="315" src="https://www.youtube.com/embed/WYt7FzFYpJc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

mountainhorse · Oct 18, 2018

162HP in break in mode... not bad

.

Ratchit · Oct 19, 2018

joey@bmp said:
I will keep adding to this thread with videos - subscribe to my youtube channel for all the latest updates

on break-in mode on the superflow 902-
<iframe width="560" height="315" src="https://www.youtube.com/embed/yehyjpKXZOQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
https://youtu.be/yehyjpKXZOQ

Still in break in doing full sweeps at max HP-
<iframe width="560" height="315" src="https://www.youtube.com/embed/2hhlv7xoGRY" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
https://youtu.be/2hhlv7xoGRY

next will be stock out of break in

I see your doing sweeps in break in mode Joey. It’s down about 3-5 hp in fuel break in just like the 800 ho at dtr . 800 ho at dtr started at around 147 and topped out at around 150 until fuel break was done.

No digital wrench??

Going to get that pipe up to temp on runs?
Thanks for posting this and keep going ??

joey@bmp · Oct 19, 2018

Ratchit said:
I see your doing sweeps in break in mode Joey. It’s down about 3-5 hp in fuel break in just like the 800 ho at dtr . 800 ho at dtr started at around 147 and topped out at around 150 until fuel break was done.

No digital wrench??

Going to get that pipe up to temp on runs?
Thanks for posting this and keep going &#55358;&#56607;&#55357;&#56397;

goridedoo · Oct 19, 2018

Looks to be right at 170 out of break in. Solid.

m1kflyingtiger · Oct 19, 2018

goridedoo said:
Looks to be right at 170 out of break in. Solid.

Heck yes! I’m just getting more and more stoked every day!

FatDogX · Oct 20, 2018

goridedoo said:
Looks to be right at 170 out of break in. Solid.

Yup!! New video is up and 170 it is!!

110 on the torque at 8050, if I remember right.

turboless terry · Oct 20, 2018

That's awesome if if that's what they are. That's going to be hard to beat but I had to see if the alpha skid and track is the greatest thing since milk.

snowmobiler · Oct 20, 2018

its ok but in the old days a pipe would give a cat 1000 190 hp 133 torque.

turboless terry · Oct 20, 2018

Never seen a cat 1000 that ran stellar enough to justify the extra 200 cc's.

Jaynelson · Oct 20, 2018

Thanks for posting - great info!

snowmobiler said:
its ok but in the old days a pipe would give a cat 1000 190 hp 133 torque.

And it would get obliterated by any new stock sled in deep snow

snowmobiler · Oct 20, 2018

yes.the hp is just way less than some old sleds.thats why i gave 170 a ok rating

snowmobiler · Oct 20, 2018

so stocker dynos show poo 170 doo 170

slyrydr · Oct 20, 2018

i light weighted my 09 1000....porting etc gave it 189.4 hp, 136 torque @ 7450 rpm....on the scale it was six pounds heavier than a polaris pro, but i had a 162 track vs 154 on the poo....uphill drag race with anything, including turbos up to 10 lbs boost, the 1000 was faster and climbed higher....hairdryers needed race gas and 12+ lbs to beat it...but i've been doing this for a long time, not many 1000's were in this class, none that i ever raced...yeah, the front end was still heavy even with the total weight being low, but the sled rocked, and i'm sorry i sold it...but life goes on...looking forward to new alpha..:face-icon-small-coo

Ratchit · Oct 20, 2018

Fuel lbs/hour is down on last test making most hp and no A/F ???:face-icon-small-con

willjogervais · Oct 21, 2018

snowmobiler said:
its ok but in the old days a pipe would give a cat 1000 190 hp 133 torque.

Haha I mean, that's cool and everything, but this is relevant to this thread how again? I'm sure there are many people who would love to talk about your all time great ditch pickle 1000 in the cat thread.

Teth-Air · Oct 21, 2018

snowmobiler said:
so stocker dynos show poo 170 doo 170

So you are saying:

"Similar power to Doo only the Polaris is way lighter and will get the power to the snow way more efficiently."

Teth-Air · Oct 21, 2018

slyrydr said:
i light weighted my 09 1000....porting etc gave it 189.4 hp, 136 torque @ 7450 rpm....on the scale it was six pounds heavier than a polaris pro, but i had a 162 track vs 154 on the poo....uphill drag race with anything, including turbos up to 10 lbs boost, the 1000 was faster and climbed higher....hairdryers needed race gas and 12+ lbs to beat it...but i've been doing this for a long time, not many 1000's were in this class, none that i ever raced...yeah, the front end was still heavy even with the total weight being low, but the sled rocked, and i'm sorry i sold it...but life goes on...looking forward to new alpha..:face-icon-small-coo

I bet you will appreciate fuel injection, oil injection, pump fuel, warranty, and just pull and go.

You're not comparing apples to apples. You might be able to give your new Alpha a diet and some tuning that will make it a competitor to your old iron. Sure you won't get those power/torque numbers but will you need too?

Motorbreath_ · Oct 21, 2018

Don't count your chickens before they are hatched..

No one who pre-ordered a 2017 summit 850 knew they had a wobbley clutch until mid season. Or that they would need to take out a loan just to pay for the oil consumption that was supposed to be better than the 800 etec.

This Polaris 840 could be a huge hit, but we should sit back and watch it all play out rather than make claims we know nothing about as of yet.

I have to admit.. Being 24 pounds lighter, possibly using the same proven clutching as in the past and the other durability upgrades they claimed to have fixed sounds super promising though. :face-icon-small-hap

slyrydr · Oct 21, 2018

read and saw all the shiny this is what we made photos from the dragon to the pro to the axys, but real world reliability for engines/electrical problems from polaris continued thru all those productions....real world problems will likely manifest themselves again...be very happy if poo has made a no shi-ut wow sled, but their history is against it....and i had a polaris rmk every year from the 700 to the axys, but my cats and doos were always more reliable...just my experience, yours may differ...:face-icon-small-dis

Polaris Axys on the Dyno - Build up

Well-known member

Well-known member

ACCOUNT CLOSED

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

ACCOUNT CLOSED

Well-known member

Well-known member

Well-known member

Similar threads