For Sale: 2004 KTM 525 EXC (Shown Timbersled kit not included)
Electric start and kick start (nice to have kick start backup, but never needed it)
Valve adjustments done annually and oil changes every other ride, though I never had gas in the oil since I had it jetted right and always enclosed enough to run at warm temps.
I've slowly built up this bike as a snowbike over a three year period. Many items are new this year with only 1 to 3 rides on them. The kit pictured has been sold so the bike itself and accessories listed are what is available. This bike has been well cared for and I'm a pretty laid back snowbike rider; preferring putting around in the trees to winding out the bike, jumping, etc. My main riding partner is my wife on her sled.
Asking price includes the following (am noting the original price of each item).
- Unibiker brand orange anodized radiator guards: $115
- SXS Engine shroud: $168
- Radiator shields - $30
- Aluminum skid plate (not attached): $150
- Acerbis Handguards: $100
- Trailtech Striker computer with water temp, ambient temp, voltage, etc. $130
- Trailtech computer guard: $60
- 3 x Outerwear snowbike prefilters: $37
- JD Jetting kit (includes various jets and needles) $85
- Aftermarket Fuel screw $35
- Heated grips: $95
- RAM ball mount (for GPS, radios, etc) $15
- Pipe wrap/silicon spray (enough wrap to do pipe several more times): $85
- Upsized battery (great for cold-weather starts and new last year): $100
- All parts to convert back to a summer-use bike minus a few plastic body parts.
Total price of these extras is $1,205.
Figuring KTM 525 value of $2,800
Totals $4,005
Sell bike and all items listed above for $3,000 cash. Title is signed and ready for new buyer. Wheels are back on but it's still setup for snow (open airbox, JD jet kit set for winter, etc.). Valves were just adjusted (which are checked annually) and it's ready to hit the snow once you add a snowbike kit.
Optional add-ons at extra cost. (I list new value and asking price for each item). I will sell any of these items paired with the bike or separately and they are boxed and ready to go.
- Second set of forks with heavy fork springs, revalved, other new internal components, and entire fork rebuild performed by Rooster's Nest MX Pro Shop: $350 forks and $700 of rebuild = $1150. Asking $650.
- IMS 3 gallon gas tank (natural color): Was $250. Asking $150.
- Seat Concepts Comfort seat and seat pan for 2004 - 2007 KTM SX/SXF/EXC/XCW. This is the Version 2 with Seat Concepts wide seat pan, high density foam, gripper top/carbon fiber sides, and optional orange stitching.
$275 and a month wait time to get. Asking $265 as it's brand new.
- Raptor X2 double ski front end. Was $1,250. Asking $595.
- Snowbike cover by Yakima Tent (who later made the cover for Timbersled). Minor wear through where I got the cover resting on the peg rather than below it and it wore through the hem. Does not effect performance and could be hemmed by someone with a sewing machine. Was $300. Asking $225.
Thanks for looking.
Electric start and kick start (nice to have kick start backup, but never needed it)
Valve adjustments done annually and oil changes every other ride, though I never had gas in the oil since I had it jetted right and always enclosed enough to run at warm temps.
I've slowly built up this bike as a snowbike over a three year period. Many items are new this year with only 1 to 3 rides on them. The kit pictured has been sold so the bike itself and accessories listed are what is available. This bike has been well cared for and I'm a pretty laid back snowbike rider; preferring putting around in the trees to winding out the bike, jumping, etc. My main riding partner is my wife on her sled.
Asking price includes the following (am noting the original price of each item).
- Unibiker brand orange anodized radiator guards: $115
- SXS Engine shroud: $168
- Radiator shields - $30
- Aluminum skid plate (not attached): $150
- Acerbis Handguards: $100
- Trailtech Striker computer with water temp, ambient temp, voltage, etc. $130
- Trailtech computer guard: $60
- 3 x Outerwear snowbike prefilters: $37
- JD Jetting kit (includes various jets and needles) $85
- Aftermarket Fuel screw $35
- Heated grips: $95
- RAM ball mount (for GPS, radios, etc) $15
- Pipe wrap/silicon spray (enough wrap to do pipe several more times): $85
- Upsized battery (great for cold-weather starts and new last year): $100
- All parts to convert back to a summer-use bike minus a few plastic body parts.
Total price of these extras is $1,205.
Figuring KTM 525 value of $2,800
Totals $4,005
Sell bike and all items listed above for $3,000 cash. Title is signed and ready for new buyer. Wheels are back on but it's still setup for snow (open airbox, JD jet kit set for winter, etc.). Valves were just adjusted (which are checked annually) and it's ready to hit the snow once you add a snowbike kit.
Optional add-ons at extra cost. (I list new value and asking price for each item). I will sell any of these items paired with the bike or separately and they are boxed and ready to go.
- Second set of forks with heavy fork springs, revalved, other new internal components, and entire fork rebuild performed by Rooster's Nest MX Pro Shop: $350 forks and $700 of rebuild = $1150. Asking $650.
- IMS 3 gallon gas tank (natural color): Was $250. Asking $150.
- Seat Concepts Comfort seat and seat pan for 2004 - 2007 KTM SX/SXF/EXC/XCW. This is the Version 2 with Seat Concepts wide seat pan, high density foam, gripper top/carbon fiber sides, and optional orange stitching.
$275 and a month wait time to get. Asking $265 as it's brand new.
- Raptor X2 double ski front end. Was $1,250. Asking $595.
- Snowbike cover by Yakima Tent (who later made the cover for Timbersled). Minor wear through where I got the cover resting on the peg rather than below it and it wore through the hem. Does not effect performance and could be hemmed by someone with a sewing machine. Was $300. Asking $225.
Thanks for looking.
