Has anyone had luck with tuning the stock clutching on these sleds? can you just take weight out and make it work or is a clutch kit a must have. We ride 10,000 ft. pm me if you have a setup for the stock clutching thanks
in good snow in cooke city (10000 feet) i had trouble getting 7900rpm out of mine. you SURELY have to remove the set screw that comes inside the pin from the factory......making it hollow. then i had to run on clicker 5 or 6 (and it was still iffy reaching 7900). i am fairly new to skidoo, but most clutching guys say it is ideal to run on clicker number 3 or 4.
Last February we rode in Cooke, all I had to do was adjust my clickers up to 5 and I was running 8100 with no problems. My sled has the stock clutching.
Last season we took all the weight out it helped but still needs more, still had to run clicker 4 and 5 got lighter pins gonna try that first, I will update this and let guys no how it works wanna be in clicker 2 or 3