I am selling a Super Light Custom Built 2012 CMX Snow Machine with a 1500 W/C 300+ HP Billet Crank Turbo Eater in it. The nuts, bolts shafts and torque arms are all Ti. New Boss seat with Red highlights and NOX pouch. I chromed and or polished just about everything. Power Addiction Racing Built and Ported a PSI 1500 W/C Engine, 48mm Lectron Snow Carbs, CPI Pipes, Belt Drive, Micro Belmont 6 Cam - 8.5", Supreme Tool 11.5 Tuner Secondary, 45 Ramp with Green Spring, 163 X 16 X 2.5 track, Bars are Ti and a UDX 6-S. This machine was put together and never used, but put into hibernation instead. You will not be disappointed with this machine.
STUPID POWER, LIGHT, STRONG, WITH A GREAT POWER TO WEIGHT RATIO.
If you are going to make me an offer please consider the amount of time and money needed to build the best high performance mountain machine you may ever ride. 20,000.00
More pictures or information on request. cmx1500@outlook.com Thanks for Looking. Comments Welcome
• PSI 1500 Engine with Ignition 10,000
• VForce 3 Reeds 900
• Engine Torque Brackets 200
• 3 Lectron Snow Carburetors W/Needles 9XL 1,200
• 3 Filters 120
• 3 Filter Socks 75
• 3 Intake Manifolds and Boots 300
• CPI Custom Made and Dyno Tuned Pipes W/Silencers 2,500
• Chrome Plating CPI Pipes and Ceramic Coating Silencers 1,600
• Match Port Timing of 3 Cylinders and Case to Cylinder 1,000
• Rear Torque Arms. (Titanium) with Bushings 1,500
• Track 163 X 2.3 X 16 (Ported) 1,100
• 4 Walker Evans Shocks Valved to Weight of Machine 1,200
• Titanium Shafts, Nuts, Bolts, Washers for Rear Skid 2,500
• Titanium Handlebars (Polished) 500
• Titanium Nuts, Bolts, Washers, front Suspension 600
• CMX Chassis with Carbon Fiber trailing Arms and Hood 6,000
• CMX Belt Drive 2,100
• Simmons Gen II Skis and Saddles 600
• Boss Seat Gen II With Red Highlights and Nitrous Pouch 700
• Ultra Dash Extreme UDX-DLR-6S With 3 Flash Probes 1,100
• Clear Gen. II Fuel Tank 400
• HV Mikuni Fuel Pump, Hoses, Fittings 120
• Throttle and Choke cables, (Extended Reach) 200
• Chrome Plating of Skid Frame, Front Suspension, Steering 1,200
• Hiper-Fax Slide Rails 200
• Micro Belmont 6 Cam 8.5” Clutch (Loaded) 2,500
• Supreme Tool 11.5” Button Cover W/Green Spring 700
• Necessary Time to Assemble and Tune Machine ??????
• Total for Parts Only (Rounded) 41115
STUPID POWER, LIGHT, STRONG, WITH A GREAT POWER TO WEIGHT RATIO.
If you are going to make me an offer please consider the amount of time and money needed to build the best high performance mountain machine you may ever ride. 20,000.00
More pictures or information on request. cmx1500@outlook.com Thanks for Looking. Comments Welcome
• PSI 1500 Engine with Ignition 10,000
• VForce 3 Reeds 900
• Engine Torque Brackets 200
• 3 Lectron Snow Carburetors W/Needles 9XL 1,200
• 3 Filters 120
• 3 Filter Socks 75
• 3 Intake Manifolds and Boots 300
• CPI Custom Made and Dyno Tuned Pipes W/Silencers 2,500
• Chrome Plating CPI Pipes and Ceramic Coating Silencers 1,600
• Match Port Timing of 3 Cylinders and Case to Cylinder 1,000
• Rear Torque Arms. (Titanium) with Bushings 1,500
• Track 163 X 2.3 X 16 (Ported) 1,100
• 4 Walker Evans Shocks Valved to Weight of Machine 1,200
• Titanium Shafts, Nuts, Bolts, Washers for Rear Skid 2,500
• Titanium Handlebars (Polished) 500
• Titanium Nuts, Bolts, Washers, front Suspension 600
• CMX Chassis with Carbon Fiber trailing Arms and Hood 6,000
• CMX Belt Drive 2,100
• Simmons Gen II Skis and Saddles 600
• Boss Seat Gen II With Red Highlights and Nitrous Pouch 700
• Ultra Dash Extreme UDX-DLR-6S With 3 Flash Probes 1,100
• Clear Gen. II Fuel Tank 400
• HV Mikuni Fuel Pump, Hoses, Fittings 120
• Throttle and Choke cables, (Extended Reach) 200
• Chrome Plating of Skid Frame, Front Suspension, Steering 1,200
• Hiper-Fax Slide Rails 200
• Micro Belmont 6 Cam 8.5” Clutch (Loaded) 2,500
• Supreme Tool 11.5” Button Cover W/Green Spring 700
• Necessary Time to Assemble and Tune Machine ??????
• Total for Parts Only (Rounded) 41115
Last edited: