• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

What's the longest track any one has put on a edge

BILTIT

Well-known member
Premium Member
Apr 9, 2011
1,682
482
83
45
Lloydminster, SK
I have an 03 vertical edge 800 151 with a 162 track under it. (uses 159 rails, drop& roll and big wheels at the rear) I am not really sure if the drop&roll is required but it was done to the sled before i owned it.



8ddd333239d2382ac72242d48b3274f1.jpg


6e412b37f9d9e627cc3bf59fd79b2d60.jpg
 
Last edited:

sled_guy

Well-known member
Premium Member
Jul 5, 2001
3,566
843
113
Riverton, Utah
I ran the 900 RMKs 166 on my 910 Edge for a couple of years. I used the Holz drop kit for the chaincase.

sled_guy
 
R
Feb 10, 2010
32
0
6
166" Edge

I run a 166" on a 162"mountain cat skid with an HRP drop and roll and extrovert drivers works well!
 

Attachments

  • IMAG0121.jpg
    IMAG0121.jpg
    97.7 KB · Views: 77

whoisthatguy

Well-known member
Lifetime Membership
Dec 27, 2007
809
248
43
If you want better traction then you go with a camoplast extreme that is for Arctic Cats. It is 3 lugs across and has bends in the lugs to better contain the snow. It has about 30% more pulling traction than a Series 4. Going with a longer Series 4 would be a giant mistake, IMO.
 

joshkoltes

Well-known member
Lifetime Membership
Dec 16, 2007
3,841
1,170
113
41
ranchester, wy - nashua, mn
Another 166 here. Pro skid 163 mounted to a power addiction tunnel and had to do math to get the location right to edge specs. Ice age rails and 9" CE components wheels, Drop and roll with a cmx drive and eight tooth avids


Not sure what I did here? Same 166 track but I think I used a hloz kit on 159 Polaris rails then a 10" wheel set from ratsled mounted reverse to take a little more slack
 
Last edited:

Jay

Well-known member
Lifetime Membership
Premium Member
Nov 26, 2007
1,362
635
113
Smithers, B.C.
Does anyone have or know where I can find a drop n roll for an edge chassis? Holz would be great. Thanks,Jay
 

Jay

Well-known member
Lifetime Membership
Premium Member
Nov 26, 2007
1,362
635
113
Smithers, B.C.
Would it be possible to see a pic? How does it fit? Bolt up the same to the bulkhead and then it's how much longer?
 
Premium Features