E
So I'm putting together an old school mod sled for the old man, and I have a pro rmk 155" track and I have rail extensions just wondering if anyone knew of what drivers to use, thanks
Pro track on gen 2
- Thread starter Earthad58
- Start date
R
you will need to get drivers for 2.86 pitch and will also need less teeth than the stock driver to allow for the clearance in the tunnel and do a drop and roll
E
What I'm wondering is , I'd there a driveshaft out if something that has those drivers and will fit a gen 2? And do you have to do a drop and roll?
No there is not. you need the 2.86 drivers from wahl, plus you need to do a drop and roll. you can get by with a edge chaincase ive done this several times. the shafts on the gen 2 are longer than the edge, so you need to shim the edge case away from the bulkhead to get the correct spacing for the shafts. approximately 1/2" I just use about 4 fender washers on all three bolts.
