J
Well, I'm waiting for DJ's clutch kit and my vents to get here for my RT1000 so I thought I would look into some drop brackets. I decided I would hack some out of some scraps from around the shop. They are not finished just yet but here is what they will look like, I need to drill a couple holes up at the top of the new piece and then finish drilling the bottom holes and get soem bolts. They are good for 1" and 2" drop, I plan to set them at two inches and redrill my front mount 1" down and maybe a 1/4 back as well but the rear set I will not be able to measure until the skid is on the ground. I wanted them to blend in, don't want the guys I ride with keeping up.