Sled randomly pops into reverse when at idle. I've seen people having issues with them on facebook but never say if anyone found a solution. Anyone having the same issues and did you find a solution?
Speedwerx Handblebar Controls Problems
- Thread starter Pow-Shredder
- Start date
I've had that happen almost every year with my sled. Couple times I thought it was the switch but it never was.
The fix is to unplug the connectors at the ecu and put dielectric grease on the plug and plug it back in. Fixed my issue every time. Moisture seems to work its way into the connector and give issues.
Sent from my iPhone using Tapatalk
The fix is to unplug the connectors at the ecu and put dielectric grease on the plug and plug it back in. Fixed my issue every time. Moisture seems to work its way into the connector and give issues.
Sent from my iPhone using Tapatalk
Thanks. I'll give that a try.
Today my sled liked to randomly die then not want to start up again until after sitting for a good 10-15 minutes what could cause that?
Today my sled liked to randomly die then not want to start up again until after sitting for a good 10-15 minutes what could cause that?
