• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

New Product: ZMotion 3/4" Offset Rear Linkage

DUKHTR3

Well-known member
Lifetime Membership
Nov 30, 2007
631
253
63
Do u have to redrill holes in the rails 3/4 back or is it figured into the design?

Sent from my E6782 using Tapatalk
 
M
Nov 16, 2009
29
6
3
Missoula, Mt
It should work on all XM, ( T3, SP) etc.

Just got mine for my T3 174 X to try to lower air pressures in my fox floats.

It is a very nice piece, CNC billet, great looking machine work. Bobby did excellent job! Looking forward to trying it out.



Ok, thanks, wasn't sure if the T3's already had this geometry. Let us know what you think after trying it.
 

Team Pigeon

Well-known member
Lifetime Membership
Jan 9, 2006
429
102
43
Pass Creek, BC.
Works deadly on my '14 163. Mounted mine 1" back so I had to grind a little off the finger and use a tie down to pull it into place. Works great, ran one setting lower on the springs. Front end felt more in control- not lifting as much when on the bar full tilt. Bought 6 in total, got 2 left for sale in south BC.

a28a60ff462a01e70957d5096b990961.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

ZRP Engineering

Well-known member
Lifetime Membership
Jan 14, 2014
737
382
63
Utah
It should work on all XM, ( T3, SP) etc.

Just got mine for my T3 174 X to try to lower air pressures in my fox floats.

It is a very nice piece, CNC billet, great looking machine work. Bobby did excellent job! Looking forward to trying it out.
This is correct
 

BIG JOHN

Well-known member
Premium Member
Nov 26, 2007
1,953
1,146
113
Minnesoooota
SHR just tested the PES Zmotion bracket in a 2015 T3 with my 880 kit...

HAD issues controlling front while climbing...

NOT ANY MORE!!!

yes you can still "wheelie" over stuff BUT if you move forward on sled the front becomes controllable...

A MUST for any bigger rider, turbo or big bore sled that tends to unsettle the stock suspension...

SHR will be stocking/including this piece in its suspension recomendations next year...BJ
 

1500psi

Well-known member
Lifetime Membership
Feb 11, 2008
508
215
43
It's racial profiling for not making it work for the 174" i demand equality by this summer. :face-icon-small-win
 

BIG JOHN

Well-known member
Premium Member
Nov 26, 2007
1,953
1,146
113
Minnesoooota
LOL

with your "special" 174 rear shock/scissor location it is not required....

just remember your "special" and you dont need what the "other" guys need:face-icon-small-win-BJ
 

av8er

Well-known member
Lifetime Membership
Sep 16, 2006
4,538
1,241
113
Kalispell, MT.
2015 t3- 174 872 TRYGSTAD

IS THIS BENEFICIAL ON THE T3- 174 OR JUST THE OLDER XM'S??
I'm new to skidoo, Dave trygstad just delivered my t3 174 today. very excited, been on turbo cats for the last 8 years. hoping I don't miss the Boost.
 

garciava

Well-known member
Premium Member
Nov 26, 2007
424
58
28
western colorado
I installed the zmotion link along with getting my shocks revalved by BigJohn at SHR. Made a big difference on my 2016 154 Summit X. Last winter I struggled with the sled due to I could not keep the skis on the ground. This winter its a different sled. The skis stayed planted even on a steep climb. Highly recommend both changes if you want to keep the front end down
 

Team Pigeon

Well-known member
Lifetime Membership
Jan 9, 2006
429
102
43
Pass Creek, BC.
Bump. Still have one bracket for sale if anyone’s interested. Located in the west kootenays near Castlegar.


Sent from my iPhone using Tapatalk
 
Premium Features