I was wondering if anyone has any experience with the early 2000s 800 engines
Are they reliable and can they be modded to high HP and b reliable?
Are they reliable and can they be modded to high HP and b reliable?
Zr800 big bore
- Thread starter J&L Snowhawk
- Start date
B
One dude to talk to...Ron Hunyady 810-444-0082. Makes a ligit 185-190hp out of his stock cylinder 100% pump gas (no any race gas needed at all) 990 big bore with Speedwerx twin pipes. The speedwerx 990 advertises 190hp but on the same dyno was 162hp. HUGE difference. Go to youtube and type in Ron Hunyady 990...I posted some vids over there a while back of it beating a TON of sleds.
k thanks
Talk to Seth out at curts he has some big bore in his old 1M
Turbo800
We're these older 800 reliable w turbos. Any used setup around for sale?
We're these older 800 reliable w turbos. Any used setup around for sale?
B
Never heard of too many of them around. Not saying nobody ever had one that ran good...
There are a ton of big bore options for these. You can put a stock 900 top end on, there are 925s, 975s, 990s, 1010s 1150s, all from many manufacturers. What I'm running is 900 cylinders, bored to take the M1000 piston. Makes it a 975 (with a shim under the cylinder) with all stock Cat parts. Works very well.
As for turbos, I've heard of a few 900 turbos that worked well, but I don't know who's kits they were.
As for turbos, I've heard of a few 900 turbos that worked well, but I don't know who's kits they were.
Similar threads
