PIDD Display

C

Csellors

New member

Lifetime Membership

May 8, 2012

24

2

3

• Feb 21, 2018

• #1

Every time i start the machine, i get the change engine oil across the display. Is there a way to clear that? I assume it is for the RZR/ Ranger. Thanks

 

S

squidbrain

Free Member

Jan 11, 2011

38

10

8

Ontario, Canada

• Feb 21, 2018

• #2

RE-install software. Go to Ride Command to get the latest. Its embedded in the trail update.

 

D

dboe03

Active member

Lifetime Membership

Mar 31, 2014

120

38

28

Fargo, ND

• Feb 21, 2018

• #3

That may be one way, but it's a maintenance reminder that is tied to the hours. You go into system settings and change it, and it will be gone. I googled it on the trail and fixed it within 5 mins.

 

Timbre

Well-known member

Premium Member

Nov 1, 2008

2,812

2,504

113

Southwestern Idaho

• Feb 21, 2018

• #4

No need to install new software. It is just a setting in the gauge that you can easily change.

 

S

squidbrain

Free Member

Jan 11, 2011

38

10

8

Ontario, Canada

• Feb 21, 2018

• #5

My Bad, your right. I didn't read properly. Reset the service reminder, in fact I think you can disable it all together by putting in 0 or something like that. can't remember what I did. Or at least change the reminder value so it appears less often.

 

S

squidbrain

Free Member

Jan 11, 2011

38

10

8

Ontario, Canada

• Feb 21, 2018

• #6

This was brought up on HCS. sled needs to be running to reset.

go here:

http://www.hardcoresledder.com/foru...change-oil-pictures-added-2.html#post16507330