R
Does any one know if ProClime rails will fit on a 1M (162" for both). I am thinking the answer is no but I thought I would ask.
'12 Pro Clime rails on 1M
- Thread starter Repoman
- Start date
Not totally sure, are u talking just the rails, or you talking whole skid? For the price of Ice Age rails, can't really beat it.. unless the pro rails r cheap
R
Just the rails.
Just the rails, not really. The mounting point of the front arm is higher on the 2012 rails than the stock king cat ones. If you have the whole suspension, you can bolt it in fairly well. If you're the same guy that's asking on arctic chat, with the Holz coilover on '07 rails, you can swap with no issues.
I'm pretty sure what the other guy has is a Holz setup for an '07+ M series. In that case, yes, the 2012 rails should work fine. As far as I know, the mounting points/geometry haven't changed since the float suspension came out in '07.
If you've got a Holz designed for a King Cat, I would say it would maybe fit, but not 100% sure, as the front arm mounting point on the rail is quite a bit higher from '07+.
If you've got a Holz designed for a King Cat, I would say it would maybe fit, but not 100% sure, as the front arm mounting point on the rail is quite a bit higher from '07+.
R
No, I am not the same guy from Arctichat. Could I buy an '07 front arm + spacers for the wider tunnel, to mount in the '12 rails and and then switch the rest over for my 1M?
Mounted a whole skid in my M sled and discovered that it needed to be 2.5" further forward in the tunnel. Upon comparison, it seems the just shifted all the mounting points in the rails forward when compared to the older float skid.
.02
.02
Similar threads
