• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

New Sidewinder roll over valve kits

MTN_VIPER

Well-known member
Lifetime Membership
Nov 26, 2007
977
437
63
NW WA St.
fourstrokesolutionsllc.com
I have been receiving quite a few requests to build a ROV kit for the Sidewinder. With that in mind, we have designed a ROV kit for the Sidewinder that replaces the normally closed OEM check valve with a normally open system similar to our Viper ROV kits.
Just like our Viper ROV kit, the Sidewinder ROV kit is a premium unit that features a Roll Over Valve Control Module (ROVCM) and the quick prime oil pump re-prime system!
I have more information at http://fourstrokesolutionsllc.webs.com/sidewinder-king-cat-rov-kits
and for installation photos here at http://fourstrokesolutionsllc.webs.com/apps/photos/album?albumid=16102135
 

Attachments

  • IMG_3310.jpg
    IMG_3310.jpg
    198.4 KB · Views: 96

MTN_VIPER

Well-known member
Lifetime Membership
Nov 26, 2007
977
437
63
NW WA St.
fourstrokesolutionsllc.com
I didn't think the Sidewinder needed a roll over kit..?

The stock normally closed valve does work. However some of my customers were having trouble with the stock OEM unit freezing closed. Usually it happens when the sled sits outside overnight in below freezing weather. If it freezes closed and you start the engine, it can over pressurize the oil tank causing it to leak at oil tank halve seal. To repair the leak requires disassembling the oil tank and re-sealing it.

Our ROV kit uses a normally open valve which is in the venting position while the sled sits overnight. Because the valve is already open and doesn't have to change positions during a cold start, the breather system can start venting right away. This allows the warm air to flow from the oil tank un-restricted as soon as possible. Which in turn, thaws out any accumulated moisture in the breather line that may have froze.

Basically our system is a normally open option for Sidewinder owners who may be having a freezing closed concerns with the stock normally closed ROV!
 

MTN_VIPER

Well-known member
Lifetime Membership
Nov 26, 2007
977
437
63
NW WA St.
fourstrokesolutionsllc.com
I recently custom built a Sidewinder ROV kit with Arctic Cat's new magnetic tether for a customer and have another unit in stock! Please PM or email me if your interested in one.
They are also on sale for 10% off (10 year anniversary) until 11/17/18!
Bill
 

Attachments

  • 28 Sidewinder King Cat ROV with magnetic tether small file size.JPG
    28 Sidewinder King Cat ROV with magnetic tether small file size.JPG
    167.2 KB · Views: 55
Last edited:

klim-in

Active member
Lifetime Membership
Nov 21, 2009
72
32
18
Idaho
I recently custom built a Sidewinder ROV kit with Arctic Cat's new magnetic tether for a customer and have another unit in stock! Please PM or email me if your interested in one.
They are also on sale for 10% off (10 year anniversary) until 11/17/18!
Bill

OK I have to brag a little here because knowing Im that customer with the AC magnetic tether being used with this awesome ROV.
But I have to chime in with this thought, last year from all the rolling over my sled went through, I cleaned up my inner cooler, air box etch and I emptied almost a half pint of engine oil that should of not been their.

So the stock ROV sucks IMO. The fact half pint of engine oil got into my inner cooler is not right.
So we will see after this season how much oil gets into areas it don't belong this time around.

Getting this new ROV from Bill you won't be disappointed, awesome tether.
 
Premium Features