• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

860 turbo

G
Nov 23, 2012
9
29
13
i need some clutching tips
the sled is overreving in the start and is going in too limp mode some times

my clutch setup is

cpc it 75gram base and 7grams in the heel

slp 170-300 spring

helix 54-46

180-300 team spring

9 psi
 

Spiderman

Active member
Lifetime Membership
Dec 1, 2007
220
41
28
Mn
I just had the same problem with my silber 800 check out my post down the turbo page a little and you will find some useful information that might help. I ended up adding more weight and a steeper helix. You need to list ur elevation and rpms start, spike, and full throttle
 

sledhed

Well-known member
Lifetime Membership
Premium Member
Dec 19, 2001
1,745
435
83
Lolo, Montana
I was going to say that sounds like a stock 800 helix, my 860 carls which is normally aspirated takes a steeper helix than that. Here are the specs for the non-turbo 860 from Carls:
- Primary
5-8K bright green primary team spring
EPI belly buster 66 gram or Polaris 10-66
- Secondary
66/42 helix
Team black / purple spring
Ended up going to a gold-black Team secondary spring to try to hold RPMs better in spring condition climbing, it helped, but problem not completely solved. Adding a turbo sounds like it would help with my RPMs though!
 
Premium Features