M
Sled is Sold...
2008 Anniversary Edition MTX Nytro Still under Yamaha Extended Service Warranty
Willing to discuss some trades
A few of the options on it…
Ulmer Stage II Mid-Mount Turbo W/Boost Gauge, and A/F meter (clutching is spot on)
Turbo Blanket
Stainless Braided Coolant lines (Teflon inner)
Stainless Braided Oil Line
14.5 Rollers
Shockwave Helix
Avid Drivers
Oft Racing Axle & Wheels
Oft Racing Steering relocator
Skinz Protective Gear Hood
Skinz Protective Gear Rear Bumper
Skinz Protective Gear Ultra-Q Exhaust
Skinz Protective Gear Front Bumper
Skinz Protective Gear Skid plate
Timbersled BarkBuster Front end (2010 Spindles)\
Timbersled Mountain Tamer Rear Suspension
Fox Floats on Front
Better Boards
Headlight Delete (running PIAA lights)
Ice Age Powder Coated Rails
174”x15”x2.5” Camo Extreme Track
HyperFax Hyfax (extreme temp, lifetime durability)
Simmons specially machined Clutching
Simmons Skiis
Simmons Snow Fin (think scratchers)
YTZ 10S battery
Tether
Etc. etc.
Spare parts
2 extra hoods (one white and one black)
1 Extra Oil tank
2 sets of used Timbersled Spindles (old tube style…dented but more than useable)
Spare Hyfax
Stock
4 Used Belts (only one with a missing thread)
Terry Cloth Cover
Blue Sled Cover
Lots of various clutch springs
Old OEM Battery
Sled was not boosted till engine hit 500 miles…Weighed and scaled all parts on and all parts off, have shaved over 85lbs. (close to net number with stuff now on it) At one time was weighed and measured over 100lbs. off the sled…
After break in, sled has always been run on Mobile1 0-30 Oil (fully synthetic) Chain case oil changed twice each season…New chain installed this season…
Under 2000 miles on sled (currently 1933 miles) Only reason for selling is want to do a new project…
Have a friend coming down from Whitecourt AB in February so, could get it up to Canada for you…
Here are some pics and different stages of the build...
Have complete pics of the build and each stage of the sled...good part with all the parts I have, is you can make it look like any one of these stages
So it is like 3-4 sleds in one
Here is current pic...
Skid pre-install
Axle Pre-install
2009 Finished pics...
2008 Anniversary Edition MTX Nytro Still under Yamaha Extended Service Warranty
Willing to discuss some trades
A few of the options on it…
Ulmer Stage II Mid-Mount Turbo W/Boost Gauge, and A/F meter (clutching is spot on)
Turbo Blanket
Stainless Braided Coolant lines (Teflon inner)
Stainless Braided Oil Line
14.5 Rollers
Shockwave Helix
Avid Drivers
Oft Racing Axle & Wheels
Oft Racing Steering relocator
Skinz Protective Gear Hood
Skinz Protective Gear Rear Bumper
Skinz Protective Gear Ultra-Q Exhaust
Skinz Protective Gear Front Bumper
Skinz Protective Gear Skid plate
Timbersled BarkBuster Front end (2010 Spindles)\
Timbersled Mountain Tamer Rear Suspension
Fox Floats on Front
Better Boards
Headlight Delete (running PIAA lights)
Ice Age Powder Coated Rails
174”x15”x2.5” Camo Extreme Track
HyperFax Hyfax (extreme temp, lifetime durability)
Simmons specially machined Clutching
Simmons Skiis
Simmons Snow Fin (think scratchers)
YTZ 10S battery
Tether
Etc. etc.
Spare parts
2 extra hoods (one white and one black)
1 Extra Oil tank
2 sets of used Timbersled Spindles (old tube style…dented but more than useable)
Spare Hyfax
Stock
4 Used Belts (only one with a missing thread)
Terry Cloth Cover
Blue Sled Cover
Lots of various clutch springs
Old OEM Battery
Sled was not boosted till engine hit 500 miles…Weighed and scaled all parts on and all parts off, have shaved over 85lbs. (close to net number with stuff now on it) At one time was weighed and measured over 100lbs. off the sled…
After break in, sled has always been run on Mobile1 0-30 Oil (fully synthetic) Chain case oil changed twice each season…New chain installed this season…
Under 2000 miles on sled (currently 1933 miles) Only reason for selling is want to do a new project…
Have a friend coming down from Whitecourt AB in February so, could get it up to Canada for you…
Here are some pics and different stages of the build...
Have complete pics of the build and each stage of the sled...good part with all the parts I have, is you can make it look like any one of these stages
So it is like 3-4 sleds in one Here is current pic...
Skid pre-install
Axle Pre-install
2009 Finished pics...
Last edited:
