S
Looking for some base starting PSI numbers for Front and Rear Fox Float
Evol R setup. What has worked for you
Evol R setup. What has worked for you
Fox Float Evol R Setup
- Thread starter Sledneck9
- Start date
S
Good info in the link above. Still looking for more input from users of this setup
G
65/125 in the fronts, clicker on 7
51 in center
150/175 rear, clicker on 12.
Did a lot or research last year and did this setting since first ride. No issues with bottoming. Set these at 40degrees in the garage. Didn't touch them all year. I'm over 250 dressed.
51 in center
150/175 rear, clicker on 12.
Did a lot or research last year and did this setting since first ride. No issues with bottoming. Set these at 40degrees in the garage. Didn't touch them all year. I'm over 250 dressed.
G
Just some push and inside lift, but that to be expected with soft setting and narrow front.
are these settings with an Alt Impact 36inch front end by any chance?
just installed one and im looking for a place to start
Thanks in advance
G
Standard width. I don't recall if alt impact has a sway bar or not. Good place to start if so. If your new front end does not then you may want to bump up the main chamber. Third year coming up for me on these and I haven't budged except rebound on some cold days.
Sent from my Pixel XL using Tapatalk
Sent from my Pixel XL using Tapatalk
SPG has some videos regarding suspension setup. I followed his settings and my sled is way better! He provides PSI settings for Fox Evol show on thr pros.
I hear you can call and get some info that way as well.
I hear you can call and get some info that way as well.
