M
I want to try this, I picked up a set of axys spindles and have them on the sled, now I need to move the suspension. :face-icon-small-hap
x3.2 track on 2012 pro avid drop and roll
- Thread starter barrone
- Start date
Hello is this a mod that is being done with out installing drop and roll case and 3inch track? how many of ya have done the 3/4 down and back with the skid and the axys spindle on a stock track?my sled I just jumped ship this season to a 12 Pro 800/163 with 14 engine and all the running components, also has Zbros 36in front end with I believe 14 Walkers and dual rate springs.
Thanks, Wildcard
Thanks, Wildcard
Last edited:
You'd think that approach angle would enter in here somewhere.
It appears with the 6-7-8 drivers- peeps are not concerned with approach angle any more ( They should be!!) as long as they can stuff a deeper track in there.......
M
How thick is the aluminum rear brackets?
B
Does Avid still make this drop and roll for pros?
F
A 3/4" drop and 3/4" back on the suspension works very well. Next will be the AXYS spindles. It is very responsive to rider input.
Similar threads
