torqued
cyl. head: 18-22ft.lbs. (25-30Nm)
base nuts: 30-34ft.lbs. (42-47Nm)
crankcase 8mm: 20-24ft.lbs (26-33Nm)
10mm: 26-30ft.lbs (36-41Nm)
flywheel: 90ft.lbs. (124Nm)
pri. clutch: small id shaft (14mm/7/16") 50ft.lbs (69Nm) (retorque after running)
large id shaft-(3/4") 40-45ft.lbs (55.2-62.1Nm) (retorque after running)
That should get you "started". Hope this helps.