Looking for a new seat cover that's not blue for my 06 switchback. Painting my hood so looking for a black cover that doesn't cost alot. Anyone have any ideas?
Seat Cover, ideas?
- Thread starter MNSledShed
- Start date
There's a seat on eBay with a black SKINZ seat cover on it for $100.
I knw of a guy with a BOSS SEAT as well for $200 with a little faded cover as well
I knw of a guy with a BOSS SEAT as well for $200 with a little faded cover as well
I was hoping to buy just a seat cover. Who makes them and how much? Thanks!
Skins does and they are $188 plus shipping
That why I said to get the seat on eBay
That why I said to get the seat on eBay
Skins does and they are $188 plus shipping
That why I said to get the seat on eBay
I hear ya Guido! The one I seen was $140 and then another $40 for shipping.
F
I had a bear take a bite out of my seat and i took it to a local furniture upholstery place and it turns out they do complete re-skins on the seats and use a more firm foam also if you want. He told me two hours of shop time at $75 and hour to recover the entire seat using that anti slip fabric. (Alaska Prices) That using the existing foam. I just got a patch on the bear bite and its held up well for 2 seasons.
Does anyone know if the newer 2010 iq seats can be made to fit?
Bigjusty did you have to do any mods to make it work? Did the front of the seat slide into the groove like the stock seat
S
Did this mod up last season, used 09 M-series Boss Seat as most of the lower part of the cover was shot on it, cut the foam to the 900 Pan took over to upholstery shop to finish up. Has just over a 2" rise on the foam, also mounted a Skinz seat support on the back. Other then the Cat track on the back works great!
Also have a 900 Skinz Gripper seat cover (Black used 2- seasons)
anyone wants $40.00 fits an 05 900 seat foam.
Another note a Skinz Airframe seat will also fit the 05 900 Part #PSK 150
Also have a 900 Skinz Gripper seat cover (Black used 2- seasons)
anyone wants $40.00 fits an 05 900 seat foam.
Another note a Skinz Airframe seat will also fit the 05 900 Part #PSK 150
MNsled. I does slide into the tank groove just like stock. Only mod was drilling 4 holes in the tunnel to attach back of the seat!
Similar threads
