G
I bought both new belts for my sled and squeal won't go away has anybody experienced this
Belt squeal
- Thread starter Glckdvd1
- Start date
D
Rear secondary clutch has adjustment for belt deflection. Depending on what clutch you have determines how its adjusted for belt width and tightness.
Have you checked for proper belt/sheave clearance? A lot of times you can get by adjusting your secondary like mentioned above, but for optimum performance and belt life set the primary clearance as well.
This should be very helpful - Read this clutching thread.
This should be very helpful - Read this clutching thread.
You most likely have a P-85 secondary on them seeing as how this is posted in the Gen 2 section. There should be a cam held on by 3 bolts on the outside of the secondary. Loosen them and turn the cam clockwise to increase the distance between the sheaves which will loosen the belt. If you don't have this adjustment on them then you would most likely have a P-90 which is on some of the lower powered sleds and requires taking the clutch apart and adding spacers between the sheaves.
