M
Yes its an Lynx hood, I did not buy it from a company, a friend of mind had it so I got it cheap!
First in ZX section!
- Thread starter Motley Doo
- Start date
Yes its an Lynx hood, I did not buy it from a company, a friend of mind had it so I got it cheap!
X
ik right i got on my dads xp and i could not get that to lay over at all
X
Are you kidding? Lets be real, the XP lays over so easy its ridiculous. Get used to how the XP rides and you will realize how good of a sled it is.
H
Need pics !
L
B
here is my 01 summit 800 425 Ibs
here is my custom summit 800 i built it has all the lightwieght parts and goodies thanks for looking ..
here is my custom summit 800 i built it has all the lightwieght parts and goodies thanks for looking ..
H
nice build
P
2003
2003 800 HO
2003 800 HO
K
03 800 HO 159, Boss seat, Boysen reeds, HPS can, Wiseco Pistons, RSI risers
60" SKYDOO rocket 54mm Aeropack motor mount, Raven Flight computer, top speed +/- 980 mph
two great hobbies
[/url]
IMG_6508 by sevenstack, on Flickr[/IMG]
60" SKYDOO rocket 54mm Aeropack motor mount, Raven Flight computer, top speed +/- 980 mph
two great hobbies
IMG_6508 by sevenstack, on Flickr[/IMG]
S
here is mine what do you guys think about chrome handguards?
R
My favorite sled to date.
01 Summit 800
02 seat and headlight cowel
V-Force 3 reeds
Dyno Port pipe and can
Thunder products V.I.P
Home-made tunnel bracket and LED lights
Simmons Skis
Sold this year, and bought an 08' Renegade 800
01 Summit 800
02 seat and headlight cowel
V-Force 3 reeds
Dyno Port pipe and can
Thunder products V.I.P
Home-made tunnel bracket and LED lights
Simmons Skis
Sold this year, and bought an 08' Renegade 800
H
ttt
Have made a lot of changes over the two years I have owned the sled. Have had it for sale for a couple days two times now and just cant let it go. So I just keep dumping more money into her.
So far...
RK tek Drop in Kit-best money spent!
Koso Egt=watertemp & RPM
Sled Head (BJ) primary and secondary clutch work
Vent kit both sides
Simmons flex skis
Boss Seat
16x151x2.25 track
8in big wheel kit
lowered rear skid
removed sway bar
led tail light
custom snowflap
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
So far...
RK tek Drop in Kit-best money spent!
Koso Egt=watertemp & RPM
Sled Head (BJ) primary and secondary clutch work
Vent kit both sides
Simmons flex skis
Boss Seat
16x151x2.25 track
8in big wheel kit
lowered rear skid
removed sway bar
led tail light
custom snowflap
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
By mcotto55 at 2011-12-18
My 700, trying to get it ready for hauling the kids around. It's not a "true" 2 up seat. It has a Boss seat on it with a Seat Jack added.
Last edited:
R
Thought I was the only one to put a 2-up on a summit.
Sold this sled to my father-in-law.
Will miss it tremendously.
Sent from my ADR6300 using Tapatalk
Sold this sled to my father-in-law.
Will miss it tremendously.
Sent from my ADR6300 using Tapatalk
P
2001 ZX
Here's my old 2001 MXZ that's been through a few changes through the years.
2001 MXZX 800
Diamond S hood
2010 Dragon seat
Homemade rear suspension
Homemade trailing arms
Dropped and rolled chaincase
Series IV Polaris Track
Yamaha Nytro skis
Race Pak Avenger III
Modded 800
Paragon Secondary
Here's my old 2001 MXZ that's been through a few changes through the years.
2001 MXZX 800
Diamond S hood
2010 Dragon seat
Homemade rear suspension
Homemade trailing arms
Dropped and rolled chaincase
Series IV Polaris Track
Yamaha Nytro skis
Race Pak Avenger III
Modded 800
Paragon Secondary
Last edited:
P
One of the best built ZX I've seen! More details on the motor though!
P
2001 ZX
:smile:
Motor has been ported and altered for the twins along with V force 3 reeds and ECM reprogram. Usually I run a set of billet 46 mm carbs but had a set of 2003 carbs on for the photo. Pipes are a set that I built.
Basically it's my prototype machine to try new ideas out on..:smile::smile:
:smile:
Motor has been ported and altered for the twins along with V force 3 reeds and ECM reprogram. Usually I run a set of billet 46 mm carbs but had a set of 2003 carbs on for the photo. Pipes are a set that I built.
Basically it's my prototype machine to try new ideas out on..:smile::smile:
H
THAT is frik effen sweet !!
C
Mod's
-Removed factory seat, added after market Skinz seat.
-Powermadd pivot riser and 6" riser block
-Currently re-replacing pictured bars with SPG Willard Bend titanium bars
-Mo-Pros tunnel rack with snowboard/ski carry
-Vents have been added on clutch and exhaust side as will as the backside of bulk head
-Removed all factory decals and ready for a www.Choadcheese.com wrap
-ODI grips
-Skidoo factory grip warmers and cork insulate
-Straight-line cable ice scratchers.
-Cut plastic material away for my feet at front running board
-Cut holes in factory running board using a series of different size hole saws so that snow can fall through.
-Removed factory seat, added after market Skinz seat.
-Powermadd pivot riser and 6" riser block
-Currently re-replacing pictured bars with SPG Willard Bend titanium bars
-Mo-Pros tunnel rack with snowboard/ski carry
-Vents have been added on clutch and exhaust side as will as the backside of bulk head
-Removed all factory decals and ready for a www.Choadcheese.com wrap
-ODI grips
-Skidoo factory grip warmers and cork insulate
-Straight-line cable ice scratchers.
-Cut plastic material away for my feet at front running board
-Cut holes in factory running board using a series of different size hole saws so that snow can fall through.
Last edited:
