"$28 Upgrade" parts list
- Thread starter TRS
- Start date
Was it installed? Get a PEX plug and install it. Call them and let them know it was missing. 307-587-6818
What's the price on the kit?
Installed my kit from Rogers over the weekend and the PEX Plug was not in the Kit-:face-icon-small-dis Missed this thread while doing the install I heat shrunk the plug cap already-
Will call them in the morning.
Can these be picked up at home depot? if so what size is required since I have my assembly already installed, and can't bring it with.
S/C
Last edited:
I have no idea how Rodger's kits are sent out but my kits go out with the 1/2" Pex plug installed in the unused 5/8" port and the 5/8" cap installed over it. More for a space saving when shipping, but it also gives me a quick visual that I indeed included all the little parts.
Sage Crusher, The 1/2"PEX test plugs are usually available at any hardware store. I live in bush Alaska and I am the one that discovered how well they fit. I purchased the first few at our local hardware store on a whim that it would save me having to machine those also, and for less than $1 Each it was well worth the gamble. There are many manufactures and they are typically available in both brass and acetal plastic (delrin).
PM me if you need more info.
Thank you LH
Appreciate the reply-would have bought your kit if you were a bit closer to Wyoming- just goes to show that most on here, if not all are willing
to go the extra mile to help others where they can !
???
S/C
Appreciate the reply-would have bought your kit if you were a bit closer to Wyoming- just goes to show that most on here, if not all are willing
to go the extra mile to help others where they can !
???
S/C
Rogers was out of the 1/2 Pex plug
I went to Home Depot and found some
Pex SharkBite part # 697285 604669
And bought a 1/2" hose clamp
Heated up the Napa power grip with a heat gun
and it peeled right off
Didn't loose any antifreeze and assembled.
Done
S/C
I went to Home Depot and found some
Pex SharkBite part # 697285 604669
And bought a 1/2" hose clamp
Heated up the Napa power grip with a heat gun
and it peeled right off
Didn't loose any antifreeze and assembled.
Done
S/C
S
We don't have NAPA over on our side of the pond, where does these hoses fit? Are they for a specific car model?
I would like to find them here, will be easier to find knowing where they go.
Thanx/Simon
I would like to find them here, will be easier to find knowing where they go.
Thanx/Simon
This is what I have found for cross reference at kakapart.com
Factory Number
NAPA 8205
CARQUEST 21488
BECK/A... 142-2377
GOODYEAR 3044
OE 1405501P00
OE 893121010A
JOHN DEERE 43702
NAPA 7378
CANADI... 14-2660-4
OE E8SZ1847F
FORD E1EH 18D334 EA
ATLAS BP-618
Omega 2375
SERVIC... 2001
Factory Number
NAPA 8205
CARQUEST 21488
BECK/A... 142-2377
GOODYEAR 3044
OE 1405501P00
OE 893121010A
JOHN DEERE 43702
NAPA 7378
CANADI... 14-2660-4
OE E8SZ1847F
FORD E1EH 18D334 EA
ATLAS BP-618
Omega 2375
SERVIC... 2001
Last edited:
T
Struggling to find the original "$28 upgrade" thread. Looked back as far as my patience would hold out... Anyone have a link?
Thanks in advance!
Thanks in advance!
I think this is the original thread.
http://www.snowest.com/forum/showthread.php?t=339282&highlight=$28+upgrade+cooler&page=6
As long as this thread is on page one of the Pro-RMK section I wanna ask something I can't find and thought I did before. Has anyone done this and what are the results on the Standard RMK setup (front tunnel cooler)? I know the front cooler is mainly for pre-120 temps as the thermostat restricts the flow to the front cooler when it opens up this would essentially keep that circuit open all the time also.
http://www.snowest.com/forum/showthread.php?t=339282&highlight=$28+upgrade+cooler&page=6
As long as this thread is on page one of the Pro-RMK section I wanna ask something I can't find and thought I did before. Has anyone done this and what are the results on the Standard RMK setup (front tunnel cooler)? I know the front cooler is mainly for pre-120 temps as the thermostat restricts the flow to the front cooler when it opens up this would essentially keep that circuit open all the time also.
Last edited: