S
2015 pro 800 with silber kit, running the Dobeck box. I was ridding at low elevations and apparently was deting just enough it back the pto plug out. I know problem there obviously. either way, the head and he plugs are fine. put new ones in just to make sure. went to fire it back up and add a little fuel. and nothing no power what so ever. not like it didn't want to start but no gauges, head light flicker or the Dobeck lights. (which flicker every time I pull the rope before this.) We looked for any broken or loose wires for 2 hours. finally had to ditch it at night and tow it out in the morning.
now its on the bench, no power and if I plug it into a battery like I was going to use digital wrench to look at the ecu I get nothing. no ecu, lights, fuel pump. tried hooking up to the ECM port and the DC port. yes I had proper polarity.
any ideas? a relay or something I should look fore?
now its on the bench, no power and if I plug it into a battery like I was going to use digital wrench to look at the ecu I get nothing. no ecu, lights, fuel pump. tried hooking up to the ECM port and the DC port. yes I had proper polarity.
any ideas? a relay or something I should look fore?