R
OK, been doing some more testing and trying to address the design flaw with the Cat. I am feeling pretty confident that the "fix" will not cause any other issues and solve a problem. However; I do not have hundreds of miles on this change, just about 50 (HARD miles) in some deep powder hill pulling.
My belt chatter has disappeared and clutches are running much cooler than previously.
NOTE: I am not here to argue with geo about how a loose bearing retainer nut not changing alignment or how the rollers are not contacting the cam and causing issues OR how deflection effects anything after engagement.
No point in discussing any of that and if it come to that, this thread will quickly be deleted by me.
ALSO, I am NOT selling anything so, those that think this is about that,need not enter the thread. I AM offering a fix to , what I feel, is a design flaw from Cat.
1st off, I would like to start to see if others can see the issue before I show you the way(s) (there are 3 ways) to fix it..
So, having said all that, Please look at the attached picture and study it and see if you can see where the problem lies..
AGAIN.. if the bickering and arguing starts, the thread will be deleted.. I am here to help but am not willing to argue with anybody..
OK, check out the pic and see if you can spot the issue.
My belt chatter has disappeared and clutches are running much cooler than previously.
NOTE: I am not here to argue with geo about how a loose bearing retainer nut not changing alignment or how the rollers are not contacting the cam and causing issues OR how deflection effects anything after engagement.
No point in discussing any of that and if it come to that, this thread will quickly be deleted by me.
ALSO, I am NOT selling anything so, those that think this is about that,need not enter the thread. I AM offering a fix to , what I feel, is a design flaw from Cat.
1st off, I would like to start to see if others can see the issue before I show you the way(s) (there are 3 ways) to fix it..
So, having said all that, Please look at the attached picture and study it and see if you can see where the problem lies..
AGAIN.. if the bickering and arguing starts, the thread will be deleted.. I am here to help but am not willing to argue with anybody..
OK, check out the pic and see if you can spot the issue.