S
plus
4140 steel drive shafts
$180
4140 steel drive shafts
$180
List of those that brought Parts and Pieces to Hawkfest and aftermarket parts.
- Thread starter ozzydog
- Start date
- Status
G
where do you go to purchase the Arctic Cat Secondary Jackshafts?
Steve
Steve From Extreme Machine has it going on with all those cool parts, call him at435-787-4199.
On a side note I'm having a new steering post mounting plate made to reposition my steering post straight up and down to get my bars farther forward and up without using any type of riser. Hope it costs under 100.00 to have made, if works out good all the tall guys will want this.
Steve From Extreme Machine has it going on with all those cool parts, call him at435-787-4199.
On a side note I'm having a new steering post mounting plate made to reposition my steering post straight up and down to get my bars farther forward and up without using any type of riser. Hope it costs under 100.00 to have made, if works out good all the tall guys will want this.
R
Les put me down for one of those!!!!
S
Copy cat!
For future reference, things to look for.
http://www.snowest.com/forum/showthread.php?t=46947&page=3
Steve I made that bottom one in the pic just like yours yesterday, actually it was Roo's handywork!
For future reference, things to look for.
http://www.snowest.com/forum/showthread.php?t=46947&page=3
Steve I made that bottom one in the pic just like yours yesterday, actually it was Roo's handywork!
Last edited:
sorry tony!
that sucked, don't forget to mention that shaft had allready been welded once. was an awesome ride, when are you going to replace driveshaft? give a call if you want some help.
Steve I made that bottom one in the pic just like yours yesterday, actually it was Roo's handywork!
that sucked, don't forget to mention that shaft had allready been welded once. was an awesome ride, when are you going to replace driveshaft? give a call if you want some help.
S
Anti-Stab tips and wheels
After seeing too many tracks get stabbed I thought I would try to help out.
These replace the existing tips and come with billet wheels also.
$150
After seeing too many tracks get stabbed I thought I would try to help out.
These replace the existing tips and come with billet wheels also.
$150
R
ohhhhh steve! soooo many snowhawk goodies!!!!!!
S
Ttt
Valuble pieces.
Sledr2
http://www.snowest.com/forum/attachment.php?attachmentid=58635&d=1236039514
http://www.snowest.com/forum/attachment.php?attachmentid=58636&d=1236039542
http://www.snowest.com/forum/attachment.php?attachmentid=58637&d=1236039577
TLKPROD
Scram600
Valuble pieces.
Sledr2
http://www.snowest.com/forum/attachment.php?attachmentid=58635&d=1236039514
http://www.snowest.com/forum/attachment.php?attachmentid=58636&d=1236039542
http://www.snowest.com/forum/attachment.php?attachmentid=58637&d=1236039577
TLKPROD
Scram600
Last edited:
S
Bored.
Sledr2
Cjgodden
Sledr2
Cjgodden
Last edited:
S
One stop thread.
Sledr2
Twin Axis on Simmons 10" ski.
Hawkafied's Artic Cat jackshaft, Sledr2 builds also.
Installed AC secondary, note Yamaha primary bore was altered TRA will bolt on without alterations mounts same as stock Powerblock.
TLKPROD
600 HO St ours
Roo's carbon fiber work.
Whitesurfs site.
Used OEM parts. http://www.whitesurf.ca/Used_aftermarket.php
New. http://www.whitesurf.ca/aftermarket.php
Sledr2
Twin Axis on Simmons 10" ski.
Hawkafied's Artic Cat jackshaft, Sledr2 builds also.
Installed AC secondary, note Yamaha primary bore was altered TRA will bolt on without alterations mounts same as stock Powerblock.
TLKPROD
600 HO St ours
Roo's carbon fiber work.
Whitesurfs site.
Used OEM parts. http://www.whitesurf.ca/Used_aftermarket.php
New. http://www.whitesurf.ca/aftermarket.php
Last edited:
S
Fuel quick disconnects.
When you want to work on the machine and access carbs or just not deal with the extra weight of the fuel. No more thinking you have supported the tank to the side, then it falls!
Female end has check valve, stops fuel from flowing out of tank, O-rings made of gas resistant Viton material.
I keep an extra male end and a length of hose to fill bottles etc.
I also use these on my BMW R1150GS, expensive tank if dropped.
$30.00
When you want to work on the machine and access carbs or just not deal with the extra weight of the fuel. No more thinking you have supported the tank to the side, then it falls!
Female end has check valve, stops fuel from flowing out of tank, O-rings made of gas resistant Viton material.
I keep an extra male end and a length of hose to fill bottles etc.
I also use these on my BMW R1150GS, expensive tank if dropped.
$30.00
Last edited:
E
where to buy
Tony,
Where can we get these specific quick connects? Or just any hardware should have them?
Tony,
Where can we get these specific quick connects? Or just any hardware should have them?
S
ME
http://www.youtube.com/watch?v=Iu7NnMzDMLY
http://www.touratech-usa.com/index.html?-session=touratech:1812D00C14315370F4YSl320F6A3
Here is my local source, lots of stuff here for you, Tony in Vermont!
http://www.youtube.com/watch?v=Iu7NnMzDMLY
http://www.touratech-usa.com/index.html?-session=touratech:1812D00C14315370F4YSl320F6A3
Here is my local source, lots of stuff here for you, Tony in Vermont!
S
Last edited:
S
Shweeet.
S
I see idaho tabs.
S
Only work down hill, helicopter to the top!
A
Those wraps are sweet !!!!
S
Wonder if the rider has been here, goes by Brad?
http://www.blog.powersportswraps.com/?tag=snowmobile-racing-wraps
Keep saying it!:face-icon-small-hap
http://www.youtube.com/watch?v=_LPghm0vAUc
http://www.blog.powersportswraps.com/?tag=snowmobile-racing-wraps
Keep saying it!:face-icon-small-hap
http://www.youtube.com/watch?v=_LPghm0vAUc
- Status
Similar threads
